Am 13.12.2011 um 05:50 schrieb Yury Sakarinen: > Hi, list. > > There are 2 covers for gta02 made of plastic and are too thick (~ 2.5 mm).
Do you have some photos to share? > If it were possible to make them out of aluminum (0.5-1mm), we would have > a slim and elegant case for our phone.. No other changes needed.. Aluminium could also be a nice material, although 0.5-1mm is quite weak, IMHO. > > Dr. H. Nikolaus Schaller писал 12.12.2011 12:04: >> Am 12.12.2011 um 09:51 schrieb Patryk Benderz: >> >>> Dnia 2011-12-11, nie o godzinie 23:36 +0100, Fernando Martins pisze: >>>> Hi, >>>> >>>> Out of curiosity would it be possible to recover the original moulds >>>> used to produce the cases? >>>> >>>> Anybody knows what happened to them? >>> Good question, however moulds are designed to produce certain amount of >>> cases. Looking at how much was made, moulds can be at end of their >>> lives. >> >> AFAIK they have been made in 2006 or 2007 for the Neo1973 (and have >> been slightly modified for the GTA02). So I think they have been made >> within FIC and since FIC was finally the manufacturing subcontractor of >> Openmoko, Inc. I think they could be somewhere within FIC. Or have been >> scrapped there after some years of not being used. >> >> Anyways, they aren't of big help since the components inserted into the >> case (earpiece, vibracall motor, speaker) are no longer produced >> or available. >> >> So we have to go the painful way of designing our own cases. But the >> good side is that we can improve on the outer shape and look&feel. >> >> Nikolaus >> >> _______________________________________________ >> Openmoko community mailing list >> [email protected] >> http://lists.openmoko.org/mailman/listinfo/community > > > > _______________________________________________ > Openmoko community mailing list > [email protected] > http://lists.openmoko.org/mailman/listinfo/community _______________________________________________ Openmoko community mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/community
