For those following the FreeCalypso project, I have just put out a packaged release of my GSM flash reading/writing etc tools:
ftp://ftp.ifctf.org/pub/GSM/FreeCalypso/loadtools-r1.tar.bz2 Of course the source for these tools has been available all along in my freecalypso-sw Hg repository on bitbucket.org and in my snapshot tarballs on the FTP site, but the release I've just put out includes a prebuilt loadagent.srec image as well, so you can now compile and run my fc-loadtool utility without having to build an ARM7 cross-compiler toolchain first (to compile loadagent for the Calypso target). My fc-loadtool is a free (source-enabled) replacement for TI's proprietary FLUID tool documented on the now-classic Wiki page: http://wiki.openmoko.org/wiki/GSM/Flashing The *.m0 byte-reversed S-record format for GSM firmware images appears to have been used in all of TI's builds, both Calypso and the later LoCosto etc (see the http://scottn.us/downloads/peek/ find, for example), so it is no surprise that the "official" mokoN images linked to from the above wiki page use this format. My leo2moko port, which builds with TI's original toolchain under Wine, produces an image in the same format as well. My fc-loadtool can flash these *.m0 images as well as the more standard S-record and binary formats; I don't know too much about the exact capabilities of TI's FLUID as I never found a source for that one. You can thus use either fc-loadtool or the original fluid.exe to flash either an official mokoN image or an image you built yourself from my leo2moko port, i.e., the compatibility matrix is complete. Enjoy! Viva la Revolucion, SF _______________________________________________ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
