Hi Paul, also adding the letux kernel mailing list because discussion becomes quite kernel focussed...
> Am 11.06.2019 um 15:38 schrieb Paul Boddie <[email protected]>: > > On Tuesday 11. June 2019 14.54.36 H. Nikolaus Schaller wrote: >> >> Maybe you could also try the letux tree. The idea of the letux tree is that >> we can collaborate on it and contribute good things to kernel.org if we are >> successful. > > I'll put the CI20 to work on it as soon as it is finished building a > Raspberry > Pi Zero toolchain that maybe will work this time. > > Since my hardware tends not to withstand the weight of these repositories > under Git management, I will download the snapshot of the tree from the > appropriate page: > > http://git.goldelico.com/?p=letux-kernel.git;a=snapshot;h=refs/heads/letux-5.1.8;sf=tgz I have just booted sucessfully the letux-5.2-rc4 kernel. Log is attached. It seems to ignore NAND completely. The only problem seems to be "spidev@0 enforce active low on chipselect handle" which indicates a missing DT property. What I wonder is where the LEDs (LED0 .. LED3) near the Ethernet controller chip DM9000C are connected to... I could not locate them in the schematics... It mentions only the RED/BLUE D5 and two wires LED1 and LED2 going from DM9000C to the RJ45 socket which has the two Ethernet status LEDs. It is likely that they go to some SD8..SD15 of the DM9000C but it seems that the schematics do not exactly match my (pink CI20 V2a) board. But I also could not locate an LED or GPIO controller driver for the DM9000C... So there is no easy way to get them blinking (heartbeat, cpu, mmc activity). BR, Nikolaus ------ U-Boot 2013.10-rc3-00096-gef995a1-dirty (Apr 13 2019 - 19:15:18) Board: ci20 (r2) (Ingenic XBurst JZ4780 SoC) DRAM: 1 GiB NAND: 8192 MiB MMC: jz_mmc msc1: 0 *** Warning - bad CRC, using default environment In: eserial4 Out: eserial4 Err: eserial4 Net: dm9000 Hit any key to stop autoboot: 0 4818644 bytes read in 792 ms (5.8 MiB/s) ## Booting kernel from Legacy Image at 88000000 ... Image Name: Linux-5.2.0-rc4-letux-l400+ Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 4818580 Bytes = 4.6 MiB Load Address: 80010000 Entry Point: 80755700 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] memory: 30000000 @ 30000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] cma: Reserved 32 MiB at 0x01000000 [ 0.000000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem [mem 0x0000000020000000-0x000000005fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000030000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000005fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] HighMem zone: 196608 pages, LIFO batch:63 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260992 [ 0.000000] Kernel command line: console=ttyS4,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 rootwait quiet rw root=/dev/mmcblk0p1 dm9000.mac_addr=d0:31:10:ff:6e:86 earlycon console=ttyS4,115200 clk_ignore_unused ignore_loglevel [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 990856K/1048576K available (7479K kernel code, 585K rwdata, 2204K rodata, 412K init, 166K bss, 24952K reserved, 32768K cma-reserved, 786432K highmem) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 222 [ 0.000000] random: get_random_bytes called from start_kernel+0x3a8/0x5ec with crng_init=0 [ 0.000000] clocksource: jz4740-timer: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 9721025 ns [ 0.000000] sched_clock: 16 bits at 3000kHz, resolution 333ns, wraps every 10922500ns [ 0.000321] Console: colour dummy device 80x25 [ 0.000000] Linux version 5.2.0-rc4-letux-l400+ ([email protected]) (gcc version 4.9.2 (GCC)) #265 PREEMPT Tue Jun 11 16:52:50 CEST 2019 [ 0.000000] CPU0 revision is: 3ee1024f (Ingenic JZRISC) [ 0.000000] FPU revision is: 00330000 [ 0.000000] MIPS: machine is img,ci20 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] memory: 30000000 @ 30000000 (usable) [ 0.000000] earlycon: jz4780_uart0 at MMIO 0x10034000 (options '') [ 0.000000] printk: bootconsole [jz4780_uart0] enabled [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 10000000 @ 00000000 (usable) [ 0.000000] memory: 30000000 @ 30000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] cma: Reserved 32 MiB at 0x01000000 [ 0.000000] Primary instruction cache 32kB, VIPT, 8-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 128 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem [mem 0x0000000020000000-0x000000005fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000030000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000005fffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] HighMem zone: 196608 pages, LIFO batch:63 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260992 [ 0.000000] Kernel command line: console=ttyS4,115200 console=tty0 mem=256M@0x0 mem=768M@0x30000000 rootwait quiet rw root=/dev/mmcblk0p1 dm9000.mac_addr=d0:31:10:ff:6e:86 earlycon console=ttyS4,115200 clk_ignore_unused ignore_loglevel [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 990856K/1048576K available (7479K kernel code, 585K rwdata, 2204K rodata, 412K init, 166K bss, 24952K reserved, 32768K cma-reserved, 786432K highmem) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 222 [ 0.000000] random: get_random_bytes called from start_kernel+0x3a8/0x5ec with crng_init=0 [ 0.000000] clocksource: jz4740-timer: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 9721025 ns [ 0.000000] sched_clock: 16 bits at 3000kHz, resolution 333ns, wraps every 10922500ns [ 0.000321] Console: colour dummy device 80x25 [ 0.002046] printk: console [tty0] enabled [ 0.006226] Calibrating delay loop... 956.00 BogoMIPS (lpj=4780032) [ 0.052190] pid_max: default: 32768 minimum: 301 [ 0.057023] LSM: Security Framework initializing [ 0.061733] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.068425] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.076110] *** VALIDATE proc *** [ 0.079586] *** VALIDATE cgroup1 *** [ 0.083162] *** VALIDATE cgroup2 *** [ 0.087574] rcu: Hierarchical SRCU implementation. [ 0.092898] devtmpfs: initialized [ 0.099829] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.110071] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.117663] pinctrl core: initialized pinctrl subsystem [ 0.123568] regulator-dummy: no parameters [ 0.128735] NET: Registered protocol family 16 [ 0.204459] jz4780-dma 13420000.dma: JZ4780 DMA controller initialised [ 0.212658] fixedregulator@0 GPIO handle specifies active low - ignored [ 0.219943] eth0_power: no parameters [ 0.223883] reg-fixed-voltage fixedregulator@0: eth0_power supplying 0uV [ 0.232445] SCSI subsystem initialized [ 0.237238] libata version 3.00 loaded. [ 0.241357] usbcore: registered new interface driver usbfs [ 0.247856] usbcore: registered new interface driver hub [ 0.253378] usbcore: registered new device driver usb [ 0.238494] jz4780-nemc 13410000.nemc: JZ4780 NEMC initialised [ 0.245114] Advanced Linux Sound Architecture Driver Initialized. [ 0.253182] clocksource: Switched to clocksource jz4740-timer [ 0.360237] VFS: Disk quotas dquot_6.6.0 [ 0.364266] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.389813] NET: Registered protocol family 2 [ 0.395493] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.403939] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.411019] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.417649] TCP: Hash tables configured (established 2048 bind 2048) [ 0.424285] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.430194] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.436752] NET: Registered protocol family 1 [ 0.441608] RPC: Registered named UNIX socket transport module. [ 0.447655] RPC: Registered udp transport module. [ 0.452386] RPC: Registered tcp transport module. [ 0.457157] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.466093] Initialise system trusted keyrings [ 0.471374] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.478371] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.484961] Key type asymmetric registered [ 0.489072] Asymmetric key parser 'x509' registered [ 0.494232] bounce: pool size: 64 pages [ 0.498215] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.505854] io scheduler mq-deadline registered [ 0.510411] io scheduler kyber registered [ 0.515729] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.524877] 10030000.serial: ttyS0 at MMIO 0x10030000 (irq = 59, base_baud = 3000000) is a 16550A [ 0.535200] 10031000.serial: ttyS1 at MMIO 0x10031000 (irq = 58, base_baud = 3000000) is a 16550A [ 0.545341] 10033000.serial: ttyS3 at MMIO 0x10033000 (irq = 56, base_baud = 3000000) is a 16550A [ 0.555477] 10034000.serial: ttyS4 at MMIO 0x10034000 (irq = 42, base_baud = 3000000) is a 16550A [ 0.564809] printk: console [ttyS4] enabled [ 0.564809] printk: console [ttyS4] enabled [ 0.573282] printk: bootconsole [jz4780_uart0] disabled [ 0.573282] printk: bootconsole [jz4780_uart0] disabled [ 0.584797] cacheinfo: Failed to find cpu0 device node [ 0.589969] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.609378] brd: module loaded [ 0.620839] loop: module loaded [ 0.625399] mtdoops: mtd device (mtddev=name/number) must be supplied [ 0.632658] spidev@0 enforce active low on chipselect handle [ 0.639303] ------------[ cut here ]------------ [ 0.644267] WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:723 spidev_probe+0x198/0x1c8 [ 0.652337] /spi_gpio/spidev@0: buggy DT: spidev listed directly in DT [ 0.658940] Modules linked in: [ 0.662034] CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc4-letux-l400+ #265 [ 0.669370] Stack : 80a90000 0000000b 00000000 00000000 8093fe64 8f8819fc 80990000 8098dc37 [ 0.677810] 8f83fbac 808e2bc4 00000001 80a83684 80aa0000 80a80000 8f8819a8 722f2733 [ 0.686248] 00000000 00000000 80990000 ffff00fe 8f881fe0 00000400 00000000 00000034 [ 0.694671] 00000100 00000200 0000000f 2d787574 80990000 00000000 8050c4f8 8091d8c0 [ 0.703077] 00000009 000002d3 80aa0000 8091d37c 8098b040 722f2733 00000000 80a80000 [ 0.711495] ... [ 0.713976] Call Trace: [ 0.716448] random: fast init done [ 0.719880] [<8001c374>] show_stack+0x6c/0x12c [ 0.724363] [<800346fc>] __warn+0xec/0x120 [ 0.728490] [<80034770>] warn_slowpath_fmt+0x40/0x64 [ 0.733494] [<8050c4f8>] spidev_probe+0x198/0x1c8 [ 0.738229] [<80506d74>] spi_drv_probe+0x88/0xbc [ 0.742872] [<8046f0f4>] really_probe+0x198/0x2f4 [ 0.747615] [<8046f5a8>] driver_probe_device+0x1f0/0x240 [ 0.752951] [<8046d20c>] bus_for_each_drv+0x90/0xc8 [ 0.757866] [<8046f2fc>] __device_attach+0xac/0x14c [ 0.762768] [<8046e170>] bus_probe_device+0x3c/0xb4 [ 0.767682] [<8046b7f4>] device_add+0x330/0x59c [ 0.772245] [<80509b58>] spi_add_device+0x134/0x188 [ 0.777161] [<8050a60c>] spi_register_controller+0x8e0/0xa68 [ 0.782853] [<8050a7e0>] devm_spi_register_controller+0x4c/0x94 [ 0.788812] [<80471424>] platform_drv_probe+0x58/0xb4 [ 0.793902] [<8046f0f4>] really_probe+0x198/0x2f4 [ 0.798630] [<8046f5a8>] driver_probe_device+0x1f0/0x240 [ 0.803980] [<8046f7ec>] device_driver_attach+0x50/0x78 [ 0.809229] [<8046f8d4>] __driver_attach+0xc0/0xdc [ 0.814057] [<8046d118>] bus_for_each_dev+0x70/0xc0 [ 0.818959] [<8046e408>] bus_add_driver+0x110/0x1f0 [ 0.823875] [<80470470>] driver_register+0xcc/0x120 [ 0.828776] [<80010da0>] do_one_initcall+0xa4/0x224 [ 0.833696] [<80a1a0f8>] kernel_init_freeable+0x228/0x328 [ 0.839128] [<807558b0>] kernel_init+0x14/0x10c [ 0.843696] [<8001610c>] ret_from_kernel_thread+0x14/0x1c [ 0.849133] ---[ end trace 9d2270c1eae7636d ]--- [ 0.854675] libphy: Fixed MDIO Bus: probed [ 0.859509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.866320] usbcore: registered new interface driver usb-storage [ 0.872961] mousedev: PS/2 mouse device common for all mice [ 0.879593] jz4740-rtc 10003000.rtc: registered as rtc0 [ 0.885904] i2c /dev entries driver [ 0.889909] IR NEC protocol handler initialized [ 0.894645] IR RC5(x/sz) protocol handler initialized [ 0.899719] IR RC6 protocol handler initialized [ 0.904373] IR JVC protocol handler initialized [ 0.908924] IR Sony protocol handler initialized [ 0.913610] IR SANYO protocol handler initialized [ 0.918335] IR Sharp protocol handler initialized [ 0.923066] IR MCE Keyboard/mouse protocol handler initialized [ 0.928953] IR XMP protocol handler initialized [ 0.933540] Driver for 1-wire Dallas network protocol. [ 0.940513] jz4740-mmc 13450000.mmc: Got CD GPIO [ 0.945898] jz4740-mmc 13450000.mmc: Looking up vmmc-supply from device tree [ 0.952984] jz4740-mmc 13450000.mmc: Looking up vmmc-supply property in node /mmc@13450000 failed [ 0.961961] jz4740-mmc 13450000.mmc: Looking up vqmmc-supply from device tree [ 0.969181] jz4740-mmc 13450000.mmc: Looking up vqmmc-supply property in node /mmc@13450000 failed [ 1.003361] jz4740-mmc 13450000.mmc: JZ SD/MMC card driver registered [ 1.009854] jz4740-mmc 13450000.mmc: Using DMA, 4-bit mode [ 1.015749] jz4740-mmc 13460000.mmc: Looking up vmmc-supply from device tree [ 1.022959] jz4740-mmc 13460000.mmc: Looking up vmmc-supply property in node /mmc@13460000 failed [ 1.031958] jz4740-mmc 13460000.mmc: Looking up vqmmc-supply from device tree [ 1.039245] jz4740-mmc 13460000.mmc: Looking up vqmmc-supply property in node /mmc@13460000 failed [ 1.071569] jz4740-mmc 13460000.mmc: JZ SD/MMC card driver registered [ 1.078114] jz4740-mmc 13460000.mmc: Using DMA, 4-bit mode [ 1.083937] ledtrig-cpu: registered to indicate activity on CPUs [ 1.090669] usbcore: registered new interface driver usbhid [ 1.096604] usbhid: USB HID core driver [ 1.102267] oprofile: using timer interrupt. [ 1.107922] Initializing XFRM netlink socket [ 1.112318] NET: Registered protocol family 17 [ 1.116897] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.125056] NET: Registered protocol family 15 [ 1.129633] 9pnet: Installing 9P2000 support [ 1.134088] Key type dns_resolver registered [ 1.139126] mmc0: new high speed SDHC card at address aaaa [ 1.145574] Loading compiled-in X.509 certificates [ 1.152277] mmcblk0: mmc0:aaaa ADLCD 29.7 GiB [ 1.163973] jz4740-rtc 10003000.rtc: setting system clock to 1970-01-01T00:00:00 UTC (0) [ 1.172221] mmcblk0: p1 [ 1.176248] clk: Not disabling unused clocks [ 1.180610] eth0_power: disabling [ 1.184009] ALSA device list: [ 1.187022] No soundcards found. [ 1.193482] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 1.239031] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.247257] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 1.242714] devtmpfs: mounted [ 1.246681] Freeing unused kernel memory: 412K [ 1.251186] This architecture does not have kernel memory protection. [ 1.257675] Run /sbin/init as init process Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.322704] systemd-udevd[740]: starting version 215 [ 2.359016] random: udevd: uninitialized urandom read (16 bytes read) [ 2.376522] random: udevd: uninitialized urandom read (16 bytes read) ^[[c. [....] Synthesizing the initial hotplug events...[ 2.738393] dm9000: unknown parameter 'mac_addr' ignored [ 2.773165] dm9000 16000000.dm9000: Looking up vcc-supply from device tree [ 2.843734] dm9000 16000000.dm9000: read wrong id 0x900a0a46 [ 2.849953] eth0: dm9000b at (ptrval),(ptrval) IRQ 72 MAC: 1a:00:00:00:00:00 (chip) done. [ ok ....] Waiting for /dev to be fully populated...done. [ ok ....] Setting parameters of disc: (none). [ ok ....] Activating swap...done. ^[[c[ 5.942896] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.25.2 e2fsck 1.42.12 (29-Aug-2014) rootfs: clean, 349561/1949696 files, 2723861/7791232 blocks done. [ 6.318393] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ ok ....] Activating lvm and md swap...done. ^[[c[....] Checking file systems...fsck from util-linux 2.25.2 done. [ ok ....] Cleaning up temporary files... /tmp. [ ok ....] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok [[c[....] Cleaning up temporary files.... [ ok ....] Setting kernel variables ...done. ^[[c[ 8.792680] random: dd: uninitialized urandom read (512 bytes read) [ 10.285960] random: crng init done [....] Configuring network interfaces...[ 12.544853] NET: Registered protocol family 10 [ 12.551826] Segment Routing with IPv6 [ 12.773241] dm9000 16000000.dm9000: eth0: link down [ 12.813218] dm9000 16000000.dm9000 eth0: link down [ 14.493233] dm9000 16000000.dm9000: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 14.500991] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.004950] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/1a:00:00:00:00:00 Sending on LPF/eth0/1a:00:00:00:00:00 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPNAK from 192.168.178.1 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 192.168.178.1 DHCPACK from 192.168.178.1 bound to 192.168.178.53 -- renewal in 326817 seconds. Cannot find device "eth1" Failed to bring up eth1. Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "hso0" Bind socket to interface: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. Failed to bring up hso0. Cannot find device "usb0" Failed to bring up usb0. Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "usb1" Bind socket to interface: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. Failed to bring up usb1. Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "usb2" Bind socket to interface: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. Failed to bring up usb2. done. [ ok ] Cleaning up temporary files.... [ ok ] Setting up ALSA...done. [ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix. [FAIL] startpar: service(s) returned failure: x11-common ... failed! INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting enhanced syslogd: rsyslogd. dhcpcd[1864]: version 6.0.5 starting dhcpcd[1864]: eth0: soliciting an IPv6 router dhcpcd[1864]: eth0: rebinding lease of 192.168.178.73 dhcpcd[1864]: eth0: Router Advertisement from fe80::464e:6dff:fe70:ae01 dhcpcd[1864]: forked to background, child pid 2078 [ ok ] Starting cgroup management daemon: cgmanager[....] Starting cgroup management proxy daemon: cgproxy. [ ok ] Starting periodic command scheduler: cron. [ ok ] Starting system message bus: dbus. [ ok ] Starting bluetooth: bluetoothd. [ 22.955253] Bluetooth: Core ver 2.22 [ 22.960271] NET: Registered protocol family 31 [ 22.966100] Bluetooth: HCI device and connection manager initialized [ 22.974242] Bluetooth: HCI socket layer initialized [ 22.980207] Bluetooth: L2CAP socket layer initialized [ 22.986432] Bluetooth: SCO socket layer initialized [ ok ] Loading cpufreq kernel modules...done (none). [ ok ] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done. /etc/X11/xinit/letux-panel-setup: 12: /etc/X11/xinit/letux-panel-setup: cannot open /proc/device-tree/model: No such file /etc/X11/xinit/letux-panel-setup: 83: /etc/X11/xinit/letux-panel-setup: cannot open /proc/device-tree/model: No such file [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Setting sysfs variables.... [FAIL] Starting ISC DHCP server: dhcpd[....] check syslog for diagnostics. ... failed! failed! [FAIL] startpar: service(s) returned failure: isc-dhcp-server nodm ... failed! Debian GNU/Linux 8 letux console letux login: [c[c[c[c[c[c[c[c[c[c[c[c[c[c[c[c[c[c Password: Login incorrect letux login: root Password: Last login: Fri May 24 17:05:54 UTC 2019 on console Linux letux 5.2.0-rc4-letux-l400+ #265 PREEMPT Tue Jun 11 16:52:50 CEST 2019 mips The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. !!! LetuxOS WARNING !!! !!! Root access through ssh and console with empty password is enabled. !!! !!! This is a big security hole. !!! !!! To disable, run 'apt-get remove letux-ssh-root' !!! root@letux:~# _______________________________________________ Community mailing list [email protected] http://lists.goldelico.com/mailman/listinfo.cgi/community http://www.tinkerphones.org
