Hi I have 2 video cards for my SE/30
One is (according to tattle tech version 2.1.7): Board Name= PDS 030 Mono Display version 1.0 Vendor ID = Memory Plus Part Number = MxPD Device Name = Mono Virtual Display It is about 3 inches high and has 10-BRD0059A (on a chip on the front) and on the back it has a barcode with B17096 and (Copy Write symbol here) 1990 Memory Plus PN X10-508 MODAM SE30 ADAPTER It shows up in the control panel as 2 monitors but when I hook up an Apple 12" Monochrome Display - the monitor shows power on but no picture. The other says (it doesn't show up with tattle tech 2.1.7): This one is high enough that I could screw it into the bracket 19" inch Dual Page display SE/30 (on one of the chips on the front) and B12060 and a barcode (also on the front) On the back it says: MoDAM SE/30 REV C (Copy Write symbol here) 1989 Memory Plus Do I need drivers for this guys for them to work? Where would I find them? Mac driver museum seems to be down. I've been to gamba site and jag's house but didn't find any info. I also tried google and alltheweb. Any body got any ideas? I really appreciate everybody's input. Kim Leslie -- Compact Macs is sponsored by <http://lowendmac.com/> and... SPECIAL LIST PRICES - Replacement Apple CDROMs from $19.99, MacOS 8.5 CD $79.99 PPC 5400/200Mhz 16/1.6GB/CD/ENET/L2 $119, 5+ for $99 <mailto:[EMAIL PROTECTED]> Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
