Anyone here who has done the VGA (not Hi-Res) modification to a CC with a lc575 mobo--has anyone had any luck with adjusting the P1 potentiometer on the logic board to wided the viewable area of the screen to the edges? I put in a capacitor like the websites explain, a .01pf ceramic disc cap rated at 2000kVDC hoping it would widen it. Before that, after I did the modification, the screen looked correct, but the screen had a large border on the left and right. Putting the cap in helped widen it, but not enough and it is curved, meaning that the sides are "cresent shaped" inward and no adjustment will help. I also very slightly raised the p1 value at the same time and at present, the lettering is also somewhat distorted. Should I further increase the P1 value, or try a better cap. NOTE: when I went to an electronics shop for a 1nf cap rated at 1500v, he looked at me weird and said that they haven't used those since televisions and radios had vaccum tubes in them! So is my cap good enough, or should I try to use two of them in there :-) ??.....................Mike T.
-- Compact Macs is sponsored by <http://lowendmac.com/> and... SPECIAL LIST PRICES - Replacement Apple CDROMs from $19.99, MacOS 8.5 CD $79.99 PPC 5400/200Mhz 16/1.6GB/CD/ENET/L2 $119, 5+ for $99 <mailto:[EMAIL PROTECTED]> Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
