The monitor on my plus tends to blank out from time to time. A slight rap on the case will bring it back, which leads me to think it is a bad contact. After taking the case of I can't find it. No signs of burns, corrosion, etc.
Sometimes it will go to a thin vertical line, but normally just goes blank. To me this suggests one of the 4 wires coming off the yoke. After looking through the archives again I'm now trying to decide whether it is a poor connection or if the power supply is failing. I tend to not think it is the power supply because there is no wavering on the screen, but I am by no means an expert.(Before you warn me, Yes I know to be INCREDIBLY careful touching things around the monitor) (pause for a minute) Ok, I just looked at the pickle's FAQ. I hadn't thought of checking the ROM and RAM. I will try this the first chance I get, but I have a feeling It is not the problem. The computer doesn't seem to notice anything is wrong. If I am running something It will go right on running until the screen comes back on. Any advice to troubleshoot this? -tglaab -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
