On Tuesday, January 7, 2003, at 09:38 pm, [EMAIL PROTECTED] wrote: > Stuart, > > Are there pictures of where the 575 a/b board is able to be cut down?
No. Basically, on the left side looking from the front, it's a straight line. On the right, there's a bulge for the audio components. At the moment, my 'bulge' is too large to let the case go back. When I final trim, I'll take some photos. > Also, > any instructions on removing yokes? I had a look at my yoke but was > very > hesitant to go unscrewing or bashing anything with a hammer just yet. > No need! ;-) There's a plastic tightening ring around the back end of the yoke, with a screw to tighen it. Much like a Jubilee clip (does that phrase travel OK?). Loosen the ring, then pull the yoke backwards, with some twisting to free it from the CRT. It takes a bit iof a pull! hth, Stuart -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
