Hello to all and thank you to all. The Macintosh HD20, Model M0135 functions with the 220 volts! And he functions well! At us, usually, it exists a button who allows to place a device on 110 volts or on 220. The absence of this button on the HD20 was the reason of my preocupation. This concern was not rational, I know. I am a little dreamer, otherwise, I would not collect! Again thank you to all
daniel :-) le 13/01/03 12:45, BrianH � [EMAIL PROTECTED] a �crit�: >>> To Daniel this means his question is answered for a HD connected over that >>> port has nothing to do with the wallcurrent. Agree? >> >> Perhaps, but whence does the HD20 draw power? > > It's got a mains connector too. The Service Manual just says 'Power Supply' > and there are no warnings about ensuring correct voltage, nor can I see any > voltage selector switches in the exploded view - so probably the psu is > territory-specific?? > > hth > > > -- > > Take care ..... > > Brian > > -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
