At 18:21 -0600 on 17/01/03, Steve Fuller wrote: >I just purchased an Asante MacCon ethernet adapter for my SE/30. I have >the larger card in the PDS slot, but I am trying to figure out if I need >to just drill holes to mount the smaller board in the back of the case, >or if I am missing a bracket. I have the metal bracket that the AUI >adapter is screwed to (the one that surrounds the RJ45 port, and the >TPL/TPN/TK switch).
There should be a rectangular metal hoop on a thin shaft that sticks up and sits just behind the hole in the case. If you're missing that, you'll need to figure out a way to mount it without the bracket, and that'll be somewhat difficult because the hole in the case is actually wider than the frame around the ports is. >As an aside, does anyone have documentation in PDF format that they >could send, or docs on the web that they could point me to? Try Gamba's service manual page. -- the pickle FAQ <http://macfaq.org/index.shtml> _________________________________________________________________ -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
