At 18:36 -0600 on 17/01/03, Steve Fuller wrote: >> There should be a rectangular metal hoop on a thin shaft that sticks up and >> sits just behind the hole in the case. If you're missing that, you'll need >>to >> figure out a way to mount it without the bracket, and that'll be somewhat >> difficult because the hole in the case is actually wider than the frame >>around >> the ports is. > >Nuts. No bracket that looks anything like that. Guess I head over to the >swap list and try and locate one. I'd rather do it right than hack >something to work. I like this beastie way too much. :)
If you can't come up with anything, which is likely, let me know and I'll see if I can track down an SE that's destined for scrap. That's not a part people typically save or care about. -- the pickle FAQ <http://macfaq.org/index.shtml> _________________________________________________________________ -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
