At 13:39 +0000 on 19/01/03, Stuart Bell wrote:

>On Sunday, January 19, 2003, at 08:46 AM, Matt Jordan wrote:
>
>> The newer Apple CD Burning software uses HFS+;  this format is
>> unreadable by any operating system short of Mac OS 8.1.  If you can
>> burn the CD in HFS format that will work but the last time I checked it
>> was not supported by the burner software on newer Macs.
>>
>
>That _is_ a bummer. I hadn't noticed that limitation. Bad news.

It's also likely that the CD was burned at a high enough speed that the LC575's
pickup circuitry simply isn't strong enough to get a signal.

When CDs are read, the laser is bounced off the reflective layer of the CD and
read by a detector.  That detector has a finite sensitivity, and the older the
drive, the lower the sensitivity tends to be.  CD-Rs and CD-RWs have much lower
reflectivity than commercially-pressed CD-ROMs (something like 20% for CD-R,
10-15% for CD-RW, and 80-95% for CD-ROM), which causes the pickup circuit no
end of problems in getting a useful signal.

First of all, make sure the format isn't a problem, but if that's OK, make sure
you're burning at about 4x or so and see if you can read it in something newer
than the 575 but older than the Mac you burned it on.
-- 

the pickle

FAQ <http://macfaq.org/index.shtml>
_________________________________________________________________

-- 
Compact Macs is sponsored by <http://lowendmac.com/>.

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
The FAQ:                <http://macfaq.org/>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------


Reply via email to