>At 15:10 -0800 on 25/03/03, Snook, John R wrote: > >>It will not boot from an internal HDD without a terminator on the external >>SCSI port. >>What could cause this? >----------------------------- >Missing terminators on the hard disk ;) >the pickle -------------------------- Or, the internal HD is setup to get termination power externally, and external HD isn't setup that way, and fuse F3 on the logic card is blown. Gamba <-------------------------- I was using a SCSI cable with a built in terminator at the end of it. It must have died. I put the termination resisters back on the HDD and tried a different SCSI cable and it worked. Thanks guys. :o) johnsn
-- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
