At 06:27 -0500 on 01/04/03, John F. Scipione wrote: >This was a very common problem with SE logic boards. It's caused by an >RC filter that is shorting out. It's a 20-pin DIP package between the
It might also be a dirty floppy drive. Does the internal work, and does the external work fine on other Macs? >it because I think it may be related to problem 1. I did my homework >on this one too and the best I could find is that I may have to solder >something on the analog board. Does anybody have any more advise for Yep. I'm not entirely sure what, exactly, the problem component is, but the first thing I'd do is make sure the luminosity cutoff was turned up a bit which may solve the problem all by itself. >vertical board. I have a mac 512 that has a nice working screen. Are >the two compatible? Could I swap out the CRT from the mac 512 into the All B&W Compact CRTs are identical. -- the pickle FAQ <http://macfaq.org/index.shtml> _________________________________________________________________ -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> The FAQ: <http://macfaq.org/> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
