Have one SE/30 with an Asant� Ethenet card (two pieces) but the machine is not recognized in my small LAN. Here are the details:
Cable modem/Router Daytek, Vigor 2200E iMac FP 800 MHz/768 MB running OSX ver. 10.2.6 iMac DV Graphite 400 MHz/ 1024 MB running OS X ver. 10.2.6 SE/30 16 MHz/80 MB running OS 7.5.5
AppleTalk active but Ethernet cannot be used. Make sure connections are correct and than reverts to Printer Port, AppleShare empty, OpenNetwork on.
TCP/IP says: Connect to Ethernet using DHCP server
On the back of the SE/30 the green Led is on and on the router the Led at the connection point is also on. The back of the SE/30 has two connectors, one AAIU and one RJ-45. Next to these is a sliding switch but no indications for high or low positions. Tried it in both positions but no results.
File Sharing is on but no connected users.
What am I doing wrong? Are the cards fried? How can I test or repair it?
Any help greatly appreciated, greetings, Andr�.
-- Compact Macs is sponsored by <http://lowendmac.com/>.
Support Low End Mac <http://lowendmac.com/lists/support.html>
Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
