> Hi, I recently bought an SE/30 but it appears the video is not working > correctly. All I get is a thin white vertical line down the center of the > screen. Any ideas of what to check, fix, replace?
With 95% certainty, it's caused by a bad solder joint or two on the four-pin connector that goes from the crt deflection yoke to the analog board. Open it up (unplugged from the mains, of course), and use fresh solder to resolder the joints. Inspect the connector; it may be burned. If so, replace the connector, or just hardwire the yoke to the board. --Cheers, -- Prof. Thomas H. Lee Center for Integrated Systems, CIS-205 420 Via Palou Mall Stanford University Stanford, CA 94305-4070 http://www-smirc.stanford.edu 650-725-3709 voice, -3383 fax -- Compact Macs is sponsored by <http://lowendmac.com/>. Support Low End Mac <http://lowendmac.com/lists/support.html> Compact Macs list info: <http://lowendmac.com/lists/compact.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
