Well, I guess the type of terminator doesn't make a difference
though frankly I'm surprised since they have different resistance
values...

I'm off to rinse and repeat with a non-Apple drive. I'll use the
hacked (by Apple) HD Setup from AUX that allows partitioning non-
Apple drives.

Does anyone know the maximum size disk partition allowed for
a Plus running System 6.0.5? I've only got a 4 gb Seagate to
experiment with and I want to make sure I don't exceed the limit.
Maybe I should just put a couple of 100 mb partitions on just for
a test.

Stephen

On Dec 5, 2003, at 07:40 pm, Stephen wrote:

I took the Apple ROM 235

See the only one that works on mine is Apple ROM fitted, an IBM.


The termination resistor pack issue I think is pertinent. The drives
I've tried before either didn't have the packs (they're onboard the
drive with the TE jumper) or had two resistor packs. There is a
common line in each pack, and there are different resistance values
between the two and three pack terminators, so this may be significant.

The 160MB drive I have that works has 2 10-leg resistor pack on it. I doubt how the bus is terminated is the issue.


--
Mark Benson

AIM - SilValleyPirate
MSN - [EMAIL PROTECTED]
Visit FlatPackMacs online: <http://fpm.68kmac.com>
Visit my Homepage: <http://homepage.mac.com/markbenson>

"Never send a human to do a machine's job."
                                -The Matrix

-- Compact Macs is sponsored by <http://lowendmac.com/>.

Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>


---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------

Reply via email to