(...sorry, but I can't recall the exact name of the thread)

The group was recently discussing problems with getting various large
capacity SCSI drives to work in the compacts (ISTR the thread was focused on
SE30's in particular).

I had posted one person (sorry, can't recall who) off-list that he would
need to add a SCSI driver (like Charismac, FWB, Silver Lining, Syquest or
ACS, etc.) to non-Apple ROM's drives to get them to properly boot.

But I just recalled something that may be pertinent to the termination
problem that was also mentioned a few times.

I found a few years back that some - at least - of the compacts (SE, SE30,
Classic II) wouldn't properly recognize a "newer, modern" (well, compared to
the Mac) internal SCSI drive even with the drive onboard termination
properly jumpered.

(This wasn't a "term-power" issue, either ...and it didn't matter whether
you were using a native 50pin drive, or a 68pin drive with a 50 pin adapter:
the jumper termination just wasn't properly recognized.)

The only reliable solution that I came up with was to make (or modify) an
internal SCSI cable with *two* 50pin sockets, and hang an internal SCSI
terminator at the end adapter of the newly made cable ...this might be
something you'd want to try if everything else has failed with a drive (that
otherwise is known working/good).

Just FYI.

--- brandon davis ---
-- sacramento,  ca --

-- 
Compact Macs is sponsored by <http://lowendmac.com/>.

      Support Low End Mac <http://lowendmac.com/lists/support.html>

Compact Macs list info: <http://lowendmac.com/lists/compact.shtml>
  --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/compact.macs%40mail.maclaunch.com/>


---------------------------------------------------------------
>The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------

Reply via email to