Yes, but afaik you have to separate them by newlines, not spaces. On Jan 10, 2016 00:01, "Justin .Gilmer" <[email protected]> wrote:
> Perhaps influence is not the best name for the command, but it is just a name > and not the issue I'm having. > > "- 2. Each of these commands must provides their answer in the format > defined by the first parameter in the response line gogui-analyze-command" > > My config file defines the following command: *dboard/Influence/influence* > > I have verified that gogui sends my program the influence command, the issue > is with the format of the response. The gogui documention for dboard says the > following: > > "dboard > The response of the command is a board of floating point numbers that > represent influence data. They will be displayed as black (positive) and > white (negative) squares on the board. The maximum size of a square is such > that the corner would touch the edge of a stone on that field; the edge > length of the square is proportional to the floating point number. The > numbers are expected to be between -1 and 1." > > This is what I'm not understanding, what is the expected format for " a board > of floating point numbers". Do I just list 19*19 floating point numbers > separated by spaces? Do I list like "A1 .7 A2 .5 A3 ..."? > > > Thank you for your help. > > -Justin > > > > _______________________________________________ > Computer-go mailing list > [email protected] > http://computer-go.org/mailman/listinfo/computer-go >
_______________________________________________ Computer-go mailing list [email protected] http://computer-go.org/mailman/listinfo/computer-go
