I don't know if I have a software or hardware problem. I have a 2004 HP Media Center m1095c desktop. It will run for about 25 minutes, then I get a blue screen that says: A problem has been detected and windows has been shut down to prevent damage to your computer. If this the first time you've sen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Run a system diagnostic utility supplied by your hardware manufacturer. In particular, run a memory check, and check for faulty or mismatched memory. Try changing video adapters. Disable or remove any newly installed hardware and drivers. Disable or remove any newly installed software. If you need to use SafeMode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, then select SafeMode. Technical Information: *** STOP: 0X0000007F(0X0000009D, 0X00000000, OX00000000, 0X00000000) Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance.
I have not done any of the above suggested things. I can do a hard shutdown and restart the PC, but again it will only run about 25 minutes. This problem first started about 9 months ago, sporadically, then went away on its own. 4 months ago I upgraded the memory with HP memory. The blue screen started appearing again about 1 month ago, and the time between occurences has increased to every time I turn it on. I would appreciate any advice you could give me, and I hope I'm not wasting your time. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en -~----------~----~----~----~------~----~------~--~---
