If it's a power supply module, and you're sure it's dead, if it can be replaced, i'd try to find a replacement and do the replacement, you could try to smell it for any burnt components smell, look for dark spots, bad capacitors etc, but it doesn't always have to be obvious. I dunno what it could be in your case, good luck though fixing it
On 8/9/09, Imperdimper <[email protected]> wrote: > > I had such a good experience with posting on this forum last time that > I am returning to see if my next issue can be troubleshooted. > > My Samsung LN32A330 LCD television has apparently died. It is > generally used as an extended desktop for my computer, though > sometimes I actually watch TV on it. But that all changed yesterday > when it refused to power up. > > The monitor is plugged into a known working receptacle. And while > plugged up it has the red standby light shown. If I hit the power > button the light will remain lit for a few seconds then flash off for > a split second and back on. > > That is about the most of it. No buttons work, nor disconnecting all > inputs. Seems the monitor is kaput. > > Called up Samsung, they wanted to send out a technician but the TV is > out of service. I had seen other reports of Samsung TVs doing this, > and it turned out to be a power supply module, resulting in a quick 20 > minute technician fix. Being technologically skilled as I am I'm > looking to do the fix myself (especially if it is as easy as a supply > module), I just need to know the right direction to look. > > Any advice? > > Nathan > > > -- Sent from my mobile device ~Coalwater~ --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en -~----------~----~----~----~------~----~------~--~---
