I figured something else out which may help in diagnosis/remedy. If when I plug in the printer, I have the top cover open, and press either the power button or the resume button, then the printer turns on and goes through initialization lighting sequence. However, this is the only way to turn on the printer. When trying to turn it off it goes through the same initializaiton lighting sequence (both print cartridge lights, then resume button, then power button) and turns itself off after about 1 minute. Right before it turns off the power light stays light for about 2 seconds. When the printer was on, i was able to print a test page by holding down the resume button. I am also able to print document from my computer. So this problem has now been narrowed down to why I need the top cover open at the same time that I plug in the printer and hold down the resume or power buttons. Any ideas would be greatly appreciated!
On Dec 27, 11:25 pm, superkeob <[email protected]> wrote: > The power supply light is on but pressing power button on printer will > not turn it on. After having printer unplugged for a few minutes, > then plug back in, the power light goes on for a few seconds, then > goes out. Anyone have an idea of how this can be fixed? -- You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en.
