When you tell computer B to share the wireless connection, it will in
effect become a DHCP server for the other computer (A) connected via
the Ethernet ports.  Computer B will will have two IP addresses--one
assigned from the wireless router to the wireless adapter and one
assigned to the Ethernet port.  Computer A will receive an IP address
from computer B and everything should work just fine.

Remember to make sure computer B is actually able to access the
Internet through its wireless adapter before beginning the setup.

Good luck.

Dale

On Oct 19, 8:19 am, KwikOne <[email protected]> wrote:
> You would also need to bridge the wireless network to the lan
>
> On Oct 18, 7:03 pm, Mohammad AbuShady <[email protected]> wrote:
>
>
>
> > i think if you open the wireless connection properties in the computer that
> > will be using the wireless, you'll have an option to let other computers in
> > the network share the connection.
>
> > On Mon, Oct 18, 2010 at 11:20 PM, N3TS3cure <[email protected]> wrote:
> > > Ok, I have a quick question.
> > > I know you can set up a computer as a wireless access point by
> > > connecting it to the router via Ethernet and then broadcasting on it's
> > > wireless card.
>
> > > Another scenario I was thinking about but not sure if it would work:
>
> > > Say computer A has an ethernet card and computer B has an ethernet
> > > card and a wireless card. (The router is in another room so I can't
> > > implement the above solution)
> > > Can I connect computer A to computer B via ethernet and computer B to
> > > the router via wireless and have internet connectivity on computer A?
>
> > > --
> > > You received this message because you are subscribed to the Google Groups
> > > "Computer Tech Support" group.
> > > To post to this group, send email to
> > > [email protected].
> > > To unsubscribe from this group, send email to
> > > [email protected]<computer-tech-support%2B
> > >  [email protected]>
> > > .
> > > For more options, visit this group at
> > >http://groups.google.com/group/computer-tech-support?hl=en.

-- 
You received this message because you are subscribed to the Google Groups 
"Computer Tech Support" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/computer-tech-support?hl=en.

Reply via email to