We will be making a large ice sculpture (1 ft x 4ft x 6 ft. block) frozen for 3 weeks with some LED lights buried internally (the lights will be powered by lithium polymer batteries (90% power at 0 degrees) buried with them).

Without the use of wires running to the outside, I want to be able to turn the LED circuit off and on to save power.

What remote control switching technology does anyone suggest I use? Radio, IR, etc. ?

This situation is kind of a backwards from the usual battery powered remote control device switching a 110v powered receiving device such as in TV's and garage door openers.

In my case, inside the ice, a low powered receiver needs to control a low powered switch that powers the LED's on and off... the external controller outside the block of ice can be battery powered or 110v. (Walking up close to the sculpture with the control device is no problem....)

The problem I suspect is that the switch's allways on receiver would be more consumptive of power than the LEDs I am trying to switch on and off.....

Any advice anyone can give me re: the appropriate technology and components I might use will be greatly appreciated....

It just occurred to me that maybe some kind of timer would work rather than a remote switching capability... ?

db


************************************************************************
* ==> QUICK LIST-COMMAND REFERENCE - Put the following commands in  <==
* ==> the body of an email & send 'em to: [EMAIL PROTECTED] <==
* Join the list: SUBSCRIBE COMPUTERGUYS-L Your Name
* Too much mail? Try Daily Digests command: SET COMPUTERGUYS-L DIGEST
* Tired of the List? Unsubscribe command: SIGNOFF COMPUTERGUYS-L
* New address? From OLD address send: CHANGE COMPUTERGUYS-L YourNewAddress
* Need more help? Send mail to: [EMAIL PROTECTED]
************************************************************************
* List archive at www.mail-archive.com/[email protected]/
* RSS at www.mail-archive.com/[email protected]/maillist.xml
* Messages bearing the header "X-No-Archive: yes" will not be archived
************************************************************************

Reply via email to