Actually, thinking more about the power on order issue -- how can you
really tell what order it is powering on/off the devices? I assume the
remote is issuing the power on commands one right after another anyway, so
there isn't much time in between to be able to notice the order?
On Tue, 8 Oct 2013, Scott Talbert wrote:
Hi Demetrio,
Thanks for sending the capture, it was very helpful.
On the input selection issue, your TV appears to be using a different input
type that I haven't seen before. I made a change and you should be able to
select an input for your TV now. Can you give it a try and see if it
actually works with the remote? I'm not sure if the 300 will support it,
though.
On the power on order issue, I'm not sure what to think about that. Like you
said, we appear to be sending the commands to the back end correctly (and the
back end reports the power order we supplied) but it seems that maybe the
remote doesn't support it. From what I can tell, the official software
doesn't seem to allow changing the power on order, even for more advanced
remotes.
Lastly, I went back and read my old emails :) I think one of the original
issues you were looking to solve was to power on your media player, wait,
then be able to send an AV command? If so, I may see a way to do that, at
least with some of the more advanced remotes. Again, I'm not sure if it will
work on the 300, but it may be worth a try. BTW, I don't see an 'AV' command
in the command list for your media player. Would it be 'Source' instead?
Scott
On Sat, 5 Oct 2013, Demetrio wrote:
Hi.
I'm back to test latest releases. :)
I'm trying to test the GUI that should give us the ability to change power
on sequence.
well, I downloaded latest version of congruity (mhgui v17) and concordance
source code, compiling them.
The power on sequence seems to be not working, it looks like it follows the
order I used to register units.
About interface, I noticed I can choose input source for one of the units,
but in such a case the unit is always the AV receiver, I can't change that.
I'm pretty sure the first time I saw TV input source, but after playing a
bit with GUI it became AV receiver and never changed again, even if I take
AV receiver to "unselected devices" list.
It should be nice if we can choose the source on the unit we like.
bye and many many thanks for your work :)
Demetrio
2013/7/29 Chain von den Keiya <ch...@rpgfiction.net>
Will keep my eyes open!
Richard
Am Sonntag, 28. Juli 2013, 20:05:23 schrieb Scott Talbert:
> Well, the remotes that are supported by myharmony.com are:
> Harmony Ultimate, Harmony Touch, Harmony Smart Control,
Harmony One+,
> Harmony 700, 650, 600, 300, 200 and Harmony Link.
>
> Of those, the Ultimate and Touch are the new models, I think,
and are
> probably pretty high end. Other than that, probably the One
is pretty
> high end.
>
> Of course, we don't have *any* support for the Ultimate,
Touch, or Smart
> Control, so those would be good for us to get access to.
>
> Scott
---------------------------------------------------------------------------
---
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
