Hi Scott.
About the TV input, I'll try it again and I'll send to you the log.
About the power on order, I see the order because remote source buttons
have a backlight, and they lights on when I send a command on the device
(if you watch at the remote picture, you'll understand immediately what I
mean).
More, the power on command is very "long" for both TV and mediaplayer.
So, do you think it's possible to change the device order even on main GUI?
I suspect that's the order the remote follows, it doesn't matter what you
set on "watch tv" button. I mean, the "watch tv" settings are to be
considered just as flags, but the order is always the one you see on the
main remote window.
Than, on the "watch tv" setup interface, when the user presses "save
changes", you should save the power on settings and even change the
"master" order.
And at least, you're right, the mediaplayer AV button is "Source", but I
mapped into the custom command #1 because on 300i the AV button works
always just on TV, it doesn't follows the source I choose with the white
button.
thanks 4 all
Demetrio
2013/10/9 Scott Talbert <s...@techie.net>
> Actually, thinking more about the power on order issue -- how can you
> really tell what order it is powering on/off the devices? I assume the
> remote is issuing the power on commands one right after another anyway, so
> there isn't much time in between to be able to notice the order?
>
>
> On Tue, 8 Oct 2013, Scott Talbert wrote:
>
> Hi Demetrio,
>>
>> Thanks for sending the capture, it was very helpful.
>>
>> On the input selection issue, your TV appears to be using a different
>> input type that I haven't seen before. I made a change and you should be
>> able to select an input for your TV now. Can you give it a try and see if
>> it actually works with the remote? I'm not sure if the 300 will support
>> it, though.
>>
>> On the power on order issue, I'm not sure what to think about that. Like
>> you said, we appear to be sending the commands to the back end correctly
>> (and the back end reports the power order we supplied) but it seems that
>> maybe the remote doesn't support it. From what I can tell, the official
>> software doesn't seem to allow changing the power on order, even for more
>> advanced remotes.
>>
>> Lastly, I went back and read my old emails :) I think one of the original
>> issues you were looking to solve was to power on your media player, wait,
>> then be able to send an AV command? If so, I may see a way to do that, at
>> least with some of the more advanced remotes. Again, I'm not sure if it
>> will work on the 300, but it may be worth a try. BTW, I don't see an 'AV'
>> command in the command list for your media player. Would it be 'Source'
>> instead?
>>
>> Scott
>>
>> On Sat, 5 Oct 2013, Demetrio wrote:
>>
>> Hi.
>>> I'm back to test latest releases. :)
>>>
>>> I'm trying to test the GUI that should give us the ability to change
>>> power
>>> on sequence.
>>>
>>> well, I downloaded latest version of congruity (mhgui v17) and
>>> concordance
>>> source code, compiling them.
>>>
>>> The power on sequence seems to be not working, it looks like it follows
>>> the
>>> order I used to register units.
>>>
>>> About interface, I noticed I can choose input source for one of the
>>> units,
>>> but in such a case the unit is always the AV receiver, I can't change
>>> that.
>>> I'm pretty sure the first time I saw TV input source, but after playing a
>>> bit with GUI it became AV receiver and never changed again, even if I
>>> take
>>> AV receiver to "unselected devices" list.
>>> It should be nice if we can choose the source on the unit we like.
>>>
>>> bye and many many thanks for your work :)
>>> Demetrio
>>>
>>>
>>>
>>> 2013/7/29 Chain von den Keiya <ch...@rpgfiction.net>
>>> Will keep my eyes open!
>>>
>>> Richard
>>>
>>> Am Sonntag, 28. Juli 2013, 20:05:23 schrieb Scott Talbert:
>>> > Well, the remotes that are supported by myharmony.com are:
>>> > Harmony Ultimate, Harmony Touch, Harmony Smart Control,
>>> Harmony One+,
>>> > Harmony 700, 650, 600, 300, 200 and Harmony Link.
>>> >
>>> > Of those, the Ultimate and Touch are the new models, I think,
>>> and are
>>> > probably pretty high end. Other than that, probably the One
>>> is pretty
>>> > high end.
>>> >
>>> > Of course, we don't have *any* support for the Ultimate,
>>> Touch, or Smart
>>> > Control, so those would be good for us to get access to.
>>> >
>>> > Scott
>>>
>>>
>>> ------------------------------**------------------------------**
>>> ---------------
>>> ---
>>> See everything from the browser to the database with AppDynamics
>>> Get end-to-end visibility with application monitoring from AppDynamics
>>> Isolate bottlenecks and diagnose root cause in seconds.
>>> Start your free trial of AppDynamics Pro today!
>>> http://pubads.g.doubleclick.**net/gampad/clk?id=48808831&iu=**
>>> /4140/ostg.clktrk<http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk>
>>>
>>> ______________________________**_________________
>>> concordance-devel mailing list
>>> concordance-devel@lists.**sourceforge.net<concordance-devel@lists.sourceforge.net>
>>> https://lists.sourceforge.net/**lists/listinfo/concordance-**devel<https://lists.sourceforge.net/lists/listinfo/concordance-devel>
>>>
>>>
>>>
>>>
>
> ------------------------------------------------------------------------------
> October Webinars: Code for Performance
> Free Intel webinars can help you accelerate application performance.
> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
> from
> the latest Intel processors and coprocessors. See abstracts and register >
> http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
> _______________________________________________
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
>
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
_______________________________________________
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel
