xavier benigni a écrit :
donc résumé des opérations :

Ok, j'ai donc essayer d'attribuer la même ip que sous windows à savoir
192.168.0.3 pour une passerelle se trouvant à l'adresse 192.168.0.1 :
# iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
sit0      no wireless extensions.
wlan0     IEEE 802.11g  ESSID:"NETGEAR"
          Mode:Managed  Frequency:2.462 GHz  Access Point:
00:18:4D:04:16:CC Bit Rate:11 Mb/s Tx-Power:20 dBm Sensitivity=-121 dBm RTS thr:2347 B Fragment thr:2346 B
          Encryption key:off
          Power Management:off
          Link Quality:100/100  Signal level:-81 dBm  Noise level:-256 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

]# ifconfig wlan0 192.168.0.3
# ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
 From 192.168.0.3 icmp_seq=2 Destination Host Unreachable
 From 192.168.0.3 icmp_seq=3 Destination Host Unreachable
 From 192.168.0.3 icmp_seq=4 Destination Host Unreachable

--- 192.168.0.1 ping statistics ---
5 packets transmitted,
0 received, +3 errors, 100% packet loss, time 4001ms  , pipe 3
# route
Table de routage IP du noyau
Destination     Passerelle      Genmask      Indic Metric Ref    Use Iface
192.168.0.0     *           255.255.255.0   U   0      0        0 wlan0
169.254.0.0     *           255.255.0.0     U     0      0        0 lo
comme tu le vois, la passerelle n'est pas encore renseignéee

# route add -net 192.168.0.0 netmask 255.255.255.0 dev wlan0
# route
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 wlan0
192.168.0.0     *               255.255.255.0   U     0      0        0 wlan0
169.254.0.0     *               255.255.0.0     U     0      0        0 lo
tu vois 2 interfaces Wlan0 en 192.168.0.0 : cette commande n'était donc pas necessaire ...

# route add default gw 192.168.0.1
# route
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 wlan0
192.168.0.0     *               255.255.255.0   U     0      0        0 wlan0
169.254.0.0     *               255.255.0.0     U     0      0        0 lo
default         192.168.0.1     0.0.0.0         UG    0      0        0 wlan0

Et à ce moment là que donne le ping ?

toujours rien justement !

____________________________________________________
Want to buy your Pack or Services from Mandriva? 
Go to http://store.mandriva.com
Join the Club : http://www.mandrivaclub.com
____________________________________________________

Répondre à