Hi Pasi,
If you insist.. (I've cutted pieces off from the ipv6-addresses) ;)
It just readily makes things very clear, thanks for that.
{ConnectionContext} [/ril_0/context1] Protocol = ip
{ConnectionContext} [/ril_0/context1] Settings = { Gateway = 10.233.105.246,
Address = 10.233.105.245, Method = static, Netmask = 255.255.255.0, Interface =
rmnet0, DomainNameServers = 62.241.198.245 62.241.198.246 }
{ConnectionContext} [/ril_0/context1] Active = True
{ConnectionContext} [/ril_0/context1] Settings = {}
{ConnectionContext} [/ril_0/context1] Active = False
{ConnectionContext} [/ril_0/context1] Protocol = ipv6
{ConnectionContext} [/ril_0/context1] IPv6.Settings = { Gateway = 2001::1223,
Address = 2001::8a0f, Interface = rmnet0, DomainNameServers = 2001::0001
2001::0002 }
{ConnectionContext} [/ril_0/context1] Active = True
{ConnectionContext} [/ril_0/context1] IPv6.Settings = {}
{ConnectionContext} [/ril_0/context1] Active = False
{ConnectionContext} [/ril_0/context1] Protocol = dual
{ConnectionContext} [/ril_0/context1] Settings = { Gateway = 10.233.105.246,
Address = 10.233.105.245, Method = static, Netmask = 255.255.255.0, Interface =
rmnet0, DomainNameServers = 62.241.198.245 62.241.198.246 }
{ConnectionContext} [/ril_0/context1] IPv6.Settings = { Interface = rmnet0 }
Interesting that in dual-mode the IPv6 settings are different than in
IPv6 only mode. Is this supposed to be this way?
{ConnectionContext} [/ril_0/context1] Active = True
{ConnectionContext} [/ril_0/context1] Settings = {}
{ConnectionContext} [/ril_0/context1] IPv6.Settings = {}
{ConnectionContext} [/ril_0/context1] Active = False
Otherwise seems like oFono is doing everything just fine.
Regards,
-Denis
_______________________________________________
connman mailing list
[email protected]
https://lists.connman.net/mailman/listinfo/connman
