Hi Pedro,
On ma, 2015-04-13 at 13:49 +0200, Pedro Erencia wrote: > Hi. > > > > We are facing some problems regarding hidden SSIDs. To summarize, if a > connection has been correctly established with a hidden SSID (so a wifi_xxxx_ > folder is created), if the AP is rebooted connman fails to remember the > network: > > > > To reproduce it I did the following: > > - Start the device with no wifi_xxxx folders and a .config according to the > testing AP. > > * The connection is established automatically correctly. > > - Power off the device and the AP. > > - After the AP is on, start the device. > > * No connection is established (though I see the hidden AP in the service > list). If I try to connect credentials are asked. > > - Remove the wifi_xxxx_ folder > > - Restart the device. > > * The connection is established automatically correctly. > > - From this point on, as long as the AP is not powered off, the device > > reestablishes the connection properly. > > > > One of our customers complained about having to re-enter the credentials > every time a new AP in the SSID was reached. I think that’s the same case. > > > > This happens with connman 1.28. Did you try this with a patch called "service: Do not clear passphrase or identity on error" that Patrik sent last Thursday to ml? I checked the ConnMan code and it looks like that patch should fix the issue you are seeing. Cheers, Jukka _______________________________________________ connman mailing list [email protected] https://lists.connman.net/mailman/listinfo/connman
