hello,
Dima Chirgadze a �crit :
>
> Dear All,
>
> The installation went fine. As in RC1 the eth0 interface was
> configured as local 192.168.1.10 and eth1 - internet xxx.xxx.xxx.xxx.
> I have to identical ISA cards 3C905B. Both were recognised and set up
> correctly. However, after final reboot. I have discovered that I am
> unable to ping to the firewall or to connect to admin interface
> (https://192.168.1.10:8443/) from local machine. On the other hand, I
> can quite happily ping any internal machine from firewall. I've looked
> at bastille-firewall.conf and see that public interface is eth0 (which
> supposed to be local) and local interface is eth1 (supposed to be
> internet)!!!!!!!!!! Ifconfig is showing that eth0 - local,
> eth1 -internet. Is it something with installation or is it me?? Has
> anybody seen this thing? What should I do to fix it? RC1 was working
> fine, may be I should go back to it.
>
> BTW I think that the network part of installation is a bit
> confusing....
Can you exactly describe us all steps you've done during the network
install process ?
IP address, DNS Address......
>
> Thanks
>
> Dima
--
Philippe Libat <[EMAIL PROTECTED]>
Linux-Mandrake http://www.linux-mandrake.com
_____________________________________________
Think Different, Think Linux
