"Gael Martin" <[EMAIL PROTECTED]> writes: > Ok Now it's installed using another mirror. > Things went fine except the fact than whenever I choose the normal install I > got kicked out when it tries to download the pictures that scroll during > install process. It kept saying "GTK Error loading ####.png" and just > wouldn't go further. I had to run the install in lovga mode to get pass > this. > Now I've got another problem. > When reaching the end of the install it then ask if we want to keep the > network settings or change them, since I was using a network install I said > it could leave it like this. But when I rebooted the box, the network > settings are now gone. I cannot connect to the MNF at all. > It does bring the eth0 (only one card in this box) but it has got no IP and > no gateway (http-naat is running). I cannot pijg anything from the MNF at > all. > I've tried the following: > #ifconfig eth0 192.168.0.249 netmask 255.255.255.0 up > and > #route add 0.0.0.0 netmask 0.0.0.0 gw 192.168.0.250 > but no success at all. > Any chance I can setup the network from the command line so that I can get > started without to have to reinstall eveything?
the above commands are ok ... but also service shorewall clear (it's not configured so it blocks everything). cheers, -- Florin http://www.mandrakesoft.com http://people.mandrakesoft.com/~florin/
