The problem of the HD is fixed. I patched the Drive Setup program with ResEdit. Have a look here :
http://www.graphixmad.plus.com/mac_troubleshooter/harddisk_problems.html I added a COMPAQ,* line in the resource fork (copy from QUANTUM,*). Jeroen Diederen wrote: > On 25/6/02 03:50, "Stew Benedict" <[EMAIL PROTECTED]> wrote: > > > > > On Tue, 25 Jun 2002, Jeroen Diederen wrote: > > > >> Hi all, > >> > >> I bought a PowerMac 7600 with two internal SCSI hard disks. They were both > >> initialized. One of the hard disks I cannot initialise with Disk Setup. It > >> can only be done with a program that was put on the other HD, called FWB > >> Hard Disk Tools. The problem is that I can only initialize the HD as one > >> complete partition and in HFS format. I would like to initialize it (partly) > >> as unallocated. Does anybody know how to do this ? > >> > > > > Initialize it with that software, then delete the partition with Linux. > > Just keep the first parttition, as a minimum, or you'll lose the partition > > table. > > > > Stew Benedict > But I can only make one partition during initialization, isn't that a > problem ? > ------------------------------------------ > Best regards, > > Jeroen Diederen > http://diederen.demon.nl
