Greetings...
I know this is not probably the best place to post this msg,
but I figured one of you guys might be able to help me out.
I downloaded the drivers from nvidia, (.tar.gz files),
and I installed them while reading the FAQ from
nvidia. After I installed the drivers, I placed
my linux version of quake III into the cdrom
and installed it. I restarted X, and went to
/usr/local/games/ and ran quake 3. When I do this
it displays some quick text then the sreen clicks and
goes black and stays there. I can't do anything,
I have to hard reset in order to get out of this.
I removed the mesa files from the location that
the Nvidia FAQ talks about, and I am not sure whats
going on.. when I type lsmod, I noticed the nvdriver
was not in there. So I loaded it.. and restarted X,
and this is what it says..
Module Size Used by
NVdriver 432200 0 (unused)
autofs 9440 1 (autoclean)
emu10k1 42696 0
At anyrate, I am not sure what the hell I am
doing wrong, so I am going to attach my
/etx/X11/XF86Config-4 file to see if anyone
can help me out.. thanks in advance for *ANY*
help!
---
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier ""
VendorName ""
ModelName ""
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-107
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 48-160
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "NVIDIA GeForce DDR (generic)"
VendorName "Unknown"
BoardName "Unknown"
Driver "nvidia"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
#Option "sw_cursor"
#Option "power_saver"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "NVIDIA GeForce DDR (generic)"
Monitor ""
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
