Hi I have a Hercules Stingray 128 3D (8mb, pci) in my xfree file
Section "Device" Identifier "device1" BoardName "Hercules Stingray 128 3D" Driver "apm" Option "DPMS"
#Option "no_accel" EndSection xfdrake did its.
but when I tryed to start x, I get only a black monitor.
my /var/log/XFree86.0.log file.
XFree86 Version 4.3.0 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] Build Date: 09 July 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jul 27 18:40:04 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (WW) Option "XkbCompat" requires an string value (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "no" (**) XKB: layout: "no" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" Using vt 7 (--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7180 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7181 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00
(II) PCI: 00:09:0: chip 1274,1371 card 1274,1371 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:0a:0: chip 10ec,8139 card 1429,d010 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1142,643d card 0000,0000 rev 02 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0003 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:12:0) Alliance Semiconductor Corporation ProMotion AT3D rev 2,
Mem @ 0xe4000000/24, I/O @ 0xec00/4, BIOS @ 0xe5000000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to
0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[2] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[3] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[4] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[5] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[6] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[7] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[8] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[2] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[3] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[4] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[5] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[6] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[7] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[8] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[12] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[13] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[14] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[15] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "apm"
(II) Loading /usr/X11R6/lib/modules/drivers/apm_drv.o
(II) Module apm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D
(II) Primary Device is: PCI 00:0c:0
(--) Assigning device section with no busID to primary device
(--) Chipset AT3D found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[12] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[13] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[14] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[15] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[8] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[16] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[17] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B](B)
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) APM(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) APM(0): Depth 24, (--) framebuffer bpp 32
(==) APM(0): RGB weight 888
(==) APM(0): Default visual is TrueColor
(==) APM(0): Using SW cursor
(--) APM(0): Chipset: "AT3D"
(--) APM(0): Linear framebuffer at 0xE4000000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) APM(0): initializing int10
(II) APM(0): Primary V_BIOS segment is: 0xc000
(--) APM(0): VideoRAM: 4096 kByte
(II) APM(0): I2C bus "Alliance bus" initialized.
(II) APM(0): I2C device "Alliance bus:ddc2" registered at address 0xA0.
(II) APM(0): I2C device "Alliance bus:ddc2" removed.
(==) APM(0): Using gamma correction (1.0, 1.0, 1.0)
(==) APM(0): Min pixel clock set to 23 MHz
(==) APM(0): Max pixel clock is 94 MHz
(II) APM(0): monitor1: Using hsync range of 31.50-37.90 kHz
(II) APM(0): monitor1: Using vrefresh range of 50.00-70.00 Hz
(II) APM(0): Clock range: 23.12 to 94.50 MHz
(II) APM(0): Not using mode "1024x480" (width too large for virtual size)
(II) APM(0): Not using mode "768x576" (hsync out of range)
(II) APM(0): Not using mode "768x576" (hsync out of range)
(II) APM(0): Not using default mode "640x350" (vrefresh out of range)
(II) APM(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "640x400" (vrefresh out of range)
(II) APM(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "720x400" (vrefresh out of range)
(II) APM(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "640x480" (vrefresh out of range)
(II) APM(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "640x480" (vrefresh out of range)
(II) APM(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "640x480" (hsync out of range)
(II) APM(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "800x600" (hsync out of range)
(II) APM(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "800x600" (hsync out of range)
(II) APM(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "800x600" (hsync out of range)
(II) APM(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) APM(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) APM(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) APM(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) APM(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) APM(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) APM(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) APM(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) APM(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) APM(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) APM(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) APM(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) APM(0): Not using default mode "896x672" (width too large for virtual
size)
(II) APM(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) APM(0): Not using default mode "896x672" (width too large for virtual
size)
(II) APM(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) APM(0): Not using default mode "928x696" (width too large for virtual
size)
(II) APM(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) APM(0): Not using default mode "928x696" (width too large for virtual
size)
(II) APM(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) APM(0): Not using default mode "960x720" (width too large for virtual
size)
(II) APM(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) APM(0): Not using default mode "960x720" (width too large for virtual
size)
(II) APM(0): Not using default mode "832x624" (width too large for virtual
size)
(II) APM(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1152x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) APM(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) APM(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) APM(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) APM(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) APM(0): Not using default mode "960x720" (width too large for virtual
size)
(II) APM(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(II) APM(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) APM(0): Not using default mode "1024x768" (width too large for virtual
size)
(**) APM(0): Virtual size is 800x600 (pitch 800)
(**) APM(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) APM(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync
(**) APM(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) APM(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync
(**) APM(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) APM(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525
-hsync -vsync
(==) APM(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe4000000 - 0xe4ffffff (0x1000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xe6000000 - 0xe60000ff (0x100) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[9] -1 0 0xe4000000 - 0xe4ffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] 0 0 0x0000ec00 - 0x0000ec0f (0x10) IS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[17] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
[18] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec0f (0x10) IX[B](B)
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
(==) APM(0): Write-combining range (0xe4000000,0x1000000)
(WW) APM(0): Cannot read colourmap from VGA. Will restore with default
(==) APM(0): Backing store disabled
(==) APM(0): Silken mouse enabled
(II) APM(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Screen to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Driver provided FillImageWriteRects replacement
Driver provided WriteBitmap replacement
Driver provided TEGlyphRenderer replacement
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
30 128x128 slots
(**) Option "dpms"
(**) APM(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) APM(0): I2C bus "Alliance bus" removed.
In bugzilla I got this Internal Server Error
The server encountered an internal error or misconfiguration and was unable to
complete your request.
Please contact the server administrator, [EMAIL PROTECTED] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log. Apache-AdvancedExtranetServer/2.0.44 (Mandrake Linux/6mdk) mod_perl/1.99_08 Perl/v5.8.0 mod_ssl/2.0.44 OpenSSL/0.9.7a Server at qa Port 80
Bj�rn J�rgensen
_________________________________________________________________
Hotmail snakker ditt spr�k! http://www.hotmail.msn.com/cgi-bin/sbox?rru=dasp/lang.asp - F� Hotmail p� norsk i dag
