http://qa.mandrakesoft.com/show_bug.cgi?id=5569
------- Additional Comments From [EMAIL PROTECTED] 2003-12-09 14:25 ------- On my system k3b hangs while scanning for CD/DVD devices. It issues this command: /usr//bin/cdrecord dev=ATAPI:/dev/ide/host0/bus1/target0/lun0/cd -checkdrive When this is done manualy i get: Cdrecord-Clone 2.01a18-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2003 J�rg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <[EMAIL PROTECTED]>. Note: The author of cdrecord is not to be bothered with problems in this version. scsidev: 'ATAPI:/dev/ide/host0/bus1/target0/lun0/cd' devname: 'ATAPI:/dev/ide/host0/bus1/target0/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. Using libscg version 'schily-0.7' Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'LITEON ' Identifikation : 'DVD-ROM LTD-165H' Revision : 'CH0E' Device seems to be: Generic mmc2 DVD-ROM. ** Here k3b/cdrecord hangs for about a minute ** /usr//bin/cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder found on this target. I have DVD-Rom drive at /dev/hdc and my cdwriter is /dev/scd0 through SCSI emulation. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I'm using 9.2RC2 and have a Samsung SC-148C cdrom and TDK CDRW4800B burner. This new version takes almost a minute to scan for SCSI drives before it opens to the main screen. After that the program works fine with no problems. The previous version of K3B 0.8 opened up much faster.
