http://qa.mandrakesoft.com/show_bug.cgi?id=5175
------- Additional Comments From [EMAIL PROTECTED] 2003-17-09 17:10 ------- Created an attachment (id=852) --> (http://qa.mandrakesoft.com/attachment.cgi?id=852&action=view) strace -o /tmp/mc.log -tt mc on 500 MHz 9.1 K6/2 system Please remember that this happens immediately on fresh boot, and never when sufficiently later. When you have waited instead of trying immediately, then the delay is not present, only the liblow errors. Also, this happens/happened on every system tested, about 8 systems altogether, and none faster than 550 MHz, and all of which take in the neighborhood of 3+ minutes just to boot Mandrake 9.1 or cooker directly into KDE by way of the login manager. Fresh strace from 200 MHz cooker system coming up. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: mc startup has actually been fubar since at least 9.0, possibly before that, but I can't remember. I haven't stopwatched it, but if started immediately upon 1st login after boot, it must be taking at least one minute, a seeming eternity, both in 9.1 and 9.2rc1. Upon entering mc at shell prompt, the screen is blanked, cursor goes to bottom left, and nothing happens for a while. Eventually, some liblow error messages quickly scroll up the screen too fast to read, and mc becomes ready to use. Hardware is rather old, P200 for rc1, with 128 MB RAM & PCI graphics card, but immaterially better on K6/2-500 with 256 MB RAM and same graphics adapter for 9.1, and on a P3-450 with 768 MB RAM and G450 graphics adapter..
