*Installs* perfectly, can be mounted & everything is there, but still
hangs at the line in dmesg "hdb: 40X CD-ROM, ATAPI CDROM drive" when I
try to boot it.
e.g. from dmesg on MDK 7.0:
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
hda: ST36421A, ATA DISK drive
hdb: 40X CD-ROM, ATAPI CDROM drive <<<<<<HANGS
HERE<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ST36421A, 6150MB w/256kB Cache, CHS=784/255/63
hdb: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
-----------------------------------------------------------------------------------?
I am sync'd with sunsite.uio.no @ the time I posted this.
- Warren.
