My cdrecorder doesn't work with 2.2.17-21mdksmp for some reason now - it
worked with 7.2b3 but not rc1. I notice there were not hdd=ide-scsi setting
for the kernel in lilo so I added those, ran lilo and rebooted, and it still
doesn't detect my Mitsumi 4801 as scsi - only ide.
here's a snippet from dmesg, you can see I have an off board ide card which
is not what my cdr is hooked to, only my hd's are, as they always have been
but I did try it without the promise ATA100 also.
hdc: FX322M, ATAPI CDROM drive
hdd: CR-4801TE, ATAPI CDROM drive
hde: IBM-DTLA-305020, ATA DISK drive
hdf: Maxtor 92041U4, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd400-0xd407,0xd802 on irq 10
hde: IBM-DTLA-305020, 19623MB w/380kB Cache, CHS=39870/16/63, UDMA(33)
hdf: Maxtor 92041U4, 19541MB w/512kB Cache, CHS=39703/16/63, UDMA(66)
hdc: ATAPI 32X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1203.579 MB/sec
p5_mmx : 1226.820 MB/sec
8regs : 924.306 MB/sec
32regs : 545.211 MB/sec
using fastest function: p5_mmx (1226.820 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hde: [PTBL] [1027/255/63] hde1 < hde5 hde6 hde7 hde8 hde9 >
hdf: [PTBL] [1027/255/63] hdf1
