Hi,
since a long time I try to configure the CD-burning on Mandrake,
I don't have success until now. I tryed this on two completly different
systems - always the same.
Always when I try to burn, eg. with X-cd-roast, I get following error:
*******************************************************************************
pregap1:
-1
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
Schilling
TOC Type: 1 =
CD-ROM
scsidev:
'0,1,0'
scsibus: 0 target: 1 lun:
0
Linux sg driver version:
2.1.39
Using libscg version
'schily-0.1'
atapi:
1
Device type : Removable
CD-ROM
Version :
0
Response Format:
1
Vendor_info : 'IDE-CD
'
Identifikation : 'R/RW 4x4x32
'
Revision :
'1.3B'
Device seems to be: Generic mmc
CD-RW.
Using generic SCSI-3/mmc CD-R driver
(mmc_cdr).
Driver flags :
SWABAUDIO
Drive buf size : 1572864 = 1536
KB
FIFO size : 4194304 = 4096
KB
Track 01: data 628 MB padsize: 30
KB
Total size: 721 MB (71:28.30) = 321623
sectors
Lout start: 721 MB (71:30/23) = 321623
sectors
Current Secsize:
2048
ATIP info from
disk:
Indicated writing power:
5
Is not
unrestricted
Is not
erasable
ATIP start of lead in: -11324
(97:31/01)
ATIP start of lead out: 359849
(79:59/74)
Disk type: Long strategy type (Cyanine, AZO or
similar)
Manuf. index:
22
Manufacturer: Ritek
Co.
Blocks total: 359849 Blocks current: 359849 Blocks remaining:
38226
Starting to write CD/DVD at speed 2 in write mode for single
session.
Waiting for reader process to fill input buffer
...
input buffer
ready.
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
error
CDB: 55 10 00 00 00 00 00 00 3C
00
status: 0x2 (CHECK
CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00
00
and cdrecordcdrecord: Warning: using default CD write parameter
data.
Sense Key: 0x5 Illegal Request, Segment
0
cdrecord: Cannot open new
session.
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru
0x0
Sense flags: Blk 0 (not
valid)
cmd finished after 0.007s timeout
200s
Mode Select Data
00 11 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00
00
cdrecord: fifo had 64 puts and 0
gets.
*******************************************************************************
Here are some infos about the system:
Mandrake 7.2
kernel 2.2.17-21
CDROM as 2nd Master, CDRW as 2nd Slave
dmesg:
Adding Swap: 530104k swap-space (priority
-1)
scsi0 : SCSI host adapter emulation for IDE ATAPI
devices
scsi : 1
host.
Vendor: E-IDE Model: CD-ROM 50X L Rev:
15
Type: CD-ROM ANSI SCSI revision:
02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun
0
Vendor: IDE-CD Model: R/RW 4x4x32 Rev:
1.3B
Type: CD-ROM ANSI SCSI revision:
02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun
0
sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2
cddatray
Uniform CD-ROM driver Revision:
3.11
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2
cddatray
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov
dmesg when mounting a CD:
VFS: Disk change detected on device
sr(11,0)
ISO 9660 Extensions:
RRIP_1991A
VFS: Disk change detected on device
sr(11,1)
ISO 9660 Extensions:
RRIP_1991A
[root@linux /root]# cdrecord
-scanbus
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
Schilling
Linux sg driver version:
2.1.39
Using libscg version
'schily-0.1'
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities
page.
0,0,0 0) 'E-IDE ' 'CD-ROM 50X L ' '15 ' Removable
CD-ROM
0,1,0 1) 'IDE-CD ' 'R/RW 4x4x32 ' '1.3B' Removable
CD-ROM
0,2,0
2)*
0,3,0
3)*
0,4,0
4)*
0,5,0
5)*
0,6,0
6)*
0,7,0
7)*
>From my point of view all works well for reading CD's.
But I'm not able to write any.
I used new and different media-types.
Can anyone help me to solve this problem, what should I do to solve this
problem ?
Thanks for any help
Udo
