Udo Weber wrote:
>
> Hi,
> since a long time I try to configure the CD-burning on Mandrake,
> I don't have success until now. I tryed this on two completly different
> systems - always the same.
> Always when I try to burn, eg. with X-cd-roast, I get following error:
>
> *******************************************************************************
> pregap1:
> -1
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
> Schilling
> TOC Type: 1 =
> CD-ROM
> scsidev:
> '0,1,0'
> scsibus: 0 target: 1 lun:
> 0
> Linux sg driver version:
> 2.1.39
> Using libscg version
> 'schily-0.1'
> atapi:
> 1
> Device type : Removable
> CD-ROM
> Version :
> 0
> Response Format:
> 1
> Vendor_info : 'IDE-CD
> '
> Identifikation : 'R/RW 4x4x32
> '
> Revision :
> '1.3B'
> Device seems to be: Generic mmc
> CD-RW.
> Using generic SCSI-3/mmc CD-R driver
> (mmc_cdr).
> Driver flags :
> SWABAUDIO
> Drive buf size : 1572864 = 1536
> KB
> FIFO size : 4194304 = 4096
> KB
> Track 01: data 628 MB padsize: 30
> KB
> Total size: 721 MB (71:28.30) = 321623
> sectors
> Lout start: 721 MB (71:30/23) = 321623
> sectors
> Current Secsize:
> 2048
> ATIP info from
> disk:
> Indicated writing power:
> 5
> Is not
> unrestricted
> Is not
> erasable
> ATIP start of lead in: -11324
> (97:31/01)
> ATIP start of lead out: 359849
> (79:59/74)
> Disk type: Long strategy type (Cyanine, AZO or
> similar)
> Manuf. index:
> 22
> Manufacturer: Ritek
> Co.
> Blocks total: 359849 Blocks current: 359849 Blocks remaining:
> 38226
> Starting to write CD/DVD at speed 2 in write mode for single
> session.
> Waiting for reader process to fill input buffer
> ...
> input buffer
> ready.
> cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
> error
> CDB: 55 10 00 00 00 00 00 00 3C
> 00
> status: 0x2 (CHECK
> CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00
> 00
> and cdrecordcdrecord: Warning: using default CD write parameter
> data.
> Sense Key: 0x5 Illegal Request, Segment
> 0
> cdrecord: Cannot open new
> session.
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru
> 0x0
> Sense flags: Blk 0 (not
> valid)
> cmd finished after 0.007s timeout
> 200s
> Mode Select Data
> 00 11 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00
> 00
> cdrecord: fifo had 64 puts and 0
> gets.
> *******************************************************************************
> Here are some infos about the system:
> Mandrake 7.2
> kernel 2.2.17-21
>
> CDROM as 2nd Master, CDRW as 2nd Slave
>
> dmesg:
> Adding Swap: 530104k swap-space (priority
> -1)
> scsi0 : SCSI host adapter emulation for IDE ATAPI
> devices
> scsi : 1
> host.
> Vendor: E-IDE Model: CD-ROM 50X L Rev:
> 15
> Type: CD-ROM ANSI SCSI revision:
> 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun
> 0
> Vendor: IDE-CD Model: R/RW 4x4x32 Rev:
> 1.3B
> Type: CD-ROM ANSI SCSI revision:
> 02
> Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun
> 0
> sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2
> cddatray
> Uniform CD-ROM driver Revision:
> 3.11
> sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2
> cddatray
> ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
> http://cesdis.gsfc.nasa.gov
>
> dmesg when mounting a CD:
> VFS: Disk change detected on device
> sr(11,0)
> ISO 9660 Extensions:
> RRIP_1991A
>
> VFS: Disk change detected on device
> sr(11,1)
> ISO 9660 Extensions:
> RRIP_1991A
>
> [root@linux /root]# cdrecord
> -scanbus
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 J�rg
> Schilling
> Linux sg driver version:
> 2.1.39
> Using libscg version
> 'schily-0.1'
> scsibus0:
> cdrecord: Warning: controller returns wrong size for CD capabilities
> page.
> 0,0,0 0) 'E-IDE ' 'CD-ROM 50X L ' '15 ' Removable
> CD-ROM
> 0,1,0 1) 'IDE-CD ' 'R/RW 4x4x32 ' '1.3B' Removable
> CD-ROM
> 0,2,0
> 2)*
> 0,3,0
> 3)*
> 0,4,0
> 4)*
> 0,5,0
> 5)*
> 0,6,0
> 6)*
> 0,7,0
> 7)*
>
> >From my point of view all works well for reading CD's.
> But I'm not able to write any.
> I used new and different media-types.
>
> Can anyone help me to solve this problem, what should I do to solve this
> problem ?
>
> Thanks for any help
> Udo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The exact same thing happens to me if I buy a cheap pack of CD-R's, then
I put a beter grade in and
works fine no i/o errrors. I don't know why but thats my experience.
--
------------------------
pub 2048G/48E9287C 2000-10-12 michael powell (sypher)
<[EMAIL PROTECTED]>
Key fingerprint = 8C52 51C3 3ACA 70B8 5883 756E 92C8 3D0D 48E9 287C
registered user #83815
------------------------
