Hi,
I have posted a lot a emails in the past to this list without result
until now.
Here is a new attempt. Maybe I have configured something wrong or the
new dhcp needs some special settings - I don't know.
With a static IP all works well but I don't have a static IP
permanently.

Here are some infos about the problem and system-environment.

Sorry for the long attachment but I realy don't know what is wrong here.

[root@mumpel /root]# ifup tr0
Determining IP information for tr0 via dhclient...Internet Software
Consortium
DHCP Client V3.0b2pl9
Copyright 1995-2000 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

tr0: Initial interrupt : 16 Mbps, shared RAM base 000d4000.
tr0: Opend adapter: Xmit bfrs: 2 X 2048, Rcv bfrs: 16 X 1032
tr0: Adapter initialized and opened.
tr0: Setting functional address: 00 00 00 00
tr0: Setting functional address: 00 04 00 00
tr0: Setting functional address: 00 04 00 00
Listening on LPF/tr0/00:20:35:c0:da:1d
Sending on   LPF/tr0/00:20:35:c0:da:1d
Sending on   Socket/fallback
DHCPREQUEST on tr0 to 255.255.255.255 port 67
DHCPACK from 9.165.160.2
tr0: Setting functional address: 00 04 00 00
tr0: Setting functional address: 00 04 00 00
bound to 9.165.172.40 -- renewal in 33394 seconds.
 done.

[root@mumpel /root]# ping wst2
PING wst2 (9.165.160.93): 56 octets data
^C
 --- wst2 ping statistics ---
6 packets transmitted, 0 packets received, 100% packet loss

[root@mumpel /root]# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt

Iface
9.165.160.0     0.0.0.0         255.255.240.0   U         0 0          0

tr0
127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0

lo
0.0.0.0         9.165.160.1     0.0.0.0         UG        0 0          0

tr0

[root@mumpel /root]# ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:242 errors:0 dropped:0 overruns:0 frame:0
          TX packets:242 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0

tr0       Link encap:16/4 Mbps Token Ring  HWaddr 00:20:35:C0:DA:1D
          inet addr:9.165.172.40  Bcast:9.165.175.255
Mask:255.255.240.0
          UP BROADCAST RUNNING MULTICAST  MTU:2000  Metric:1
          RX packets:20566 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1149 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          Interrupt:9 Base address:0xa20 Memory:d4000-d7fff

    [root@mumpel /root]# rpm -qa |grep dhcp
dhcp-3.0b2pl9-2mdk
dhcp-client-3.0b2pl9-2mdk

[root@mumpel /root]# more /etc/sysconfig/network-scripts/ifcfg-tr0
DEVICE="tr0"
IPADDR=""
NETMASK="255.255.240.0"
ONBOOT="no"
BOOTPROTO="dhcp"

****************************************************************
Once again, after I got the IP over DHCP,
there is no ping or anything else possible anymore.
All works fine with a static IP !

Do I have to install any other packages ?
Is the ifcfg-tr0  ok ?
I hope somebody can help me to figure out where are the problems.

Thanks in advance
Udo

Reply via email to