>
> I changed the colour scheme and was now able to see the addresses I type
> into the to field of netscape.
>
> Greg
>
> Greg Sarsons wrote:
> >
> > Well I burned the beta iso's and this is how it turned out on a Abit
> > kt7-raid mb with 256m and an IBM udma100 DeskStar 30g drive. Using Asus
> > 7100 GeForce2 MX 32m vid card. SCSI card aha-1505.
> >
> > The install acted much like 7.2. I did notice on the partitioning that
> > not all the directories were listed on the drop down menu. Seems to me
> > that in 7.2 I could pick /boot.
> >
> > This install was done using expert .......
> >
> > Previously with 7.2 the scsi card worked on problem during the install
> > setting it with aha=0x140,9,7,1. I did the same and it said it was
> > located. However, when I booted up it was not present. See demg.txt
> > ... said I had a conflict but this was not so before.
> >
> > When I run DrakConf and then exit the loose the screen and am left with
> > a nice mouse pointer. Must do ctrl-alt-backspace. Same for both root
> > and user.
> >
> > Tried deleting a user but errored with a ptmp error.
> >
> > Sawfish or is it Sawmill, can't remembe what the new name is, was
> > installed but fails to run. It seems to start loading but then just
> > sits there.
If you run Sawfish it will look like noting is running with it
completely blank screen but push the middle mouse button and ...
Maybe something like a background with the line:"Sawfish is running, use
middle mouse button to choose program to start" would be usefull for
first time users.
> >
> > Gnome does run.
> >
> > My RTL-8139 card works fine and nothing had to be changed.
> >
> > Not a big fan a watching only 3 images during the install. Made the
> > install seem longer than watching each individual file go by.
> >
> > Noticed as well that the recpients line in netscape email is always
> > blank ... can't type anything.
> >
> > Greg
> >
> > ------------------------------------------------------------------------
> > Linux version 2.4.2-3mdk ([EMAIL PROTECTED]) (gcc version egcs-2.91.66
>19990314/Linux (egcs-1.1.2 release)) #1 Tue Feb 27 02:14:17 CET 2001
> > BIOS-provided physical RAM map:
> > BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
> > BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
> > BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
> > BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
> > BIOS-e820: 000000000fef0000 @ 0000000000100000 (usable)
> > BIOS-e820: 000000000000d000 @ 000000000fff3000 (ACPI data)
> > BIOS-e820: 0000000000003000 @ 000000000fff0000 (ACPI NVS)
> > On node 0 totalpages: 65520
> > zone(0): 4096 pages.
> > zone(1): 61424 pages.
> > zone(2): 0 pages.
> > Kernel command line: root=/dev/hde7 vga=788
> > Initializing CPU#0
> > Detected 800.032 MHz processor.
> > Console: colour dummy device 80x25
> > Calibrating delay loop... 1595.80 BogoMIPS
> > Memory: 253992k/262080k available (956k kernel code, 7700k reserved, 387k data,
>224k init, 0k highmem)
> > Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
> > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
> > Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
> > Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
> > VFS: Diskquotas version dquot_6.5.0 initialized
> > CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
> > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> > CPU: L2 Cache: 256K (64 bytes/line)
> > CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
> > CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
> > CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
> > CPU: AMD Athlon(tm) Processor stepping 02
> > Enabling fast FPU save and restore... done.
> > Checking 'hlt' instruction... OK.
> > POSIX conformance testing by UNIFIX
> > mtrr: v1.37 (20001109) Richard Gooch ([EMAIL PROTECTED])
> > mtrr: detected mtrr type: Intel
> > PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=1
> > PCI: Using configuration type 1
> > PCI: Probing PCI hardware
> > Unknown bridge resource 0: assuming transparent
> > PCI: Using IRQ router VIA [1106/0686] at 00:07.0
> > isapnp: Scanning for PnP cards...
> > isapnp: Card 'Adaptec AVA-1505A'
> > isapnp: 1 Plug & Play card detected total
> > Linux NET4.0 for Linux 2.4
> > Based upon Swansea University Computer Society NET3.039
> > Initializing RT netlink socket
> > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
> > Starting kswapd v1.8
> > vesafb: framebuffer at 0xd8000000, mapped to 0xd0800000, size 32768k
> > vesafb: mode is 800x600x16, linelength=1600, pages=3
> > vesafb: protected mode interface info at c000:0ed1
> > vesafb: scrolling: redraw
> > vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
> > Console: switching to colour frame buffer device 100x37
> > fb0: VESA VGA frame buffer device
> > pty: 256 Unix98 ptys configured
> > block: queued sectors max/low 168712kB/56237kB, 512 slots per queue
> > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: IDE controller on PCI bus 00 dev 39
> > VP_IDE: chipset revision 16
> > VP_IDE: not 100% native mode: will probe irqs later
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
> > ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
> > ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
> > HPT370: IDE controller on PCI bus 00 dev 98
> > PCI: Found IRQ 11 for device 00:13.0
> > HPT370: chipset revision 3
> > HPT370: not 100% native mode: will probe irqs later
> > ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:pio
> > ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio
> > hdc: CD-ROM 52X/AKH, ATAPI CD/DVD-ROM drive
> > hdd: MATSHITA CD-RW CW-7585, ATAPI CD/DVD-ROM drive
> > hde: IBM-DTLA-307030, ATA DISK drive
> > ide1 at 0x170-0x177,0x376 on irq 15
> > ide2 at 0xd400-0xd407,0xd802 on irq 11
> > hde: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100)
> > hdc: ATAPI 52X CD-ROM drive, 192kB Cache, UDMA(33)
> > Uniform CD-ROM driver Revision: 3.12
> > hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
> > Partition check:
> > hde: [PTBL] [3737/255/63] hde1 hde2 < hde5 hde6 hde7 hde8 hde9 hde10 >
> > RAMDISK: ext2 filesystem found at block 0
> > RAMDISK: Loading 1500 blocks [1 disk] into ram disk...
>|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
> > Freeing initrd memory: 1500k freed
> > Serial driver version 5.02 (2000-08-09) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
>SERIAL_PCI ISAPNP enabled
> > ttyS00 at 0x03f8 (irq = 4) is a 16550A
> > ttyS01 at 0x02f8 (irq = 3) is a 16550A
> > md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > md.c: sizeof(mdp_super_t) = 4096
> > autodetecting RAID arrays
> > autorun ...
> > ... autorun DONE.
> > NET4: Linux TCP/IP 1.0 for NET4.0
> > IP Protocols: ICMP, UDP, TCP, IGMP
> > IP: routing cache hash table of 2048 buckets, 16Kbytes
> > TCP: Hash tables configured (established 16384 bind 16384)
> > Linux IP multicast router 0.06 plus PIM-SM
> > IP-Config: No network devices available.
> > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> > VFS: Mounted root (ext2 filesystem).
> > VFS: Mounted root (ext2 filesystem) readonly.
> > change_root: old root has d_count=3
> > Trying to unmount old root ... okay
> > Freeing unused kernel memory: 224k freed
> > Adding Swap: 257000k swap-space (priority -1)
> > SCSI subsystem driver Revision: 1.00
> > aha152x: BIOS test: passed, detected 1 controller(s)
> > aha152x: resetting bus...
> > aha152x0: vital data: rev=3, io=0x140 (0x140/0x140), irq=9, scsiid=7,
>reconnect=enabled, parity=enabled, synchronous=disabled, delay=1000, extended
>translation=disabled
> > aha152x0: trying software interrupt, lost.
> > aha152x0: IRQ 9 possibly wrong. Please verify.
> > SCSI subsystem driver Revision: 1.00
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > PCI: Found IRQ 10 for device 00:0d.0
> > PCI: The same IRQ used for device 00:0f.0
> > usb.c: registered new driver usbdevfs
> > usb.c: registered new driver hub
> > usb-uhci.c: $Revision: 1.251 $ time 02:23:32 Feb 27 2001
> > usb-uhci.c: High bandwidth mode enabled
> > PCI: Found IRQ 11 for device 00:07.2
> > PCI: The same IRQ used for device 00:07.3
> > usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 11
> > usb-uhci.c: Detected 2 ports
> > usb.c: new USB bus registered, assigned bus number 1
> > hub.c: USB hub found
> > hub.c: 2 ports detected
> > PCI: Found IRQ 11 for device 00:07.3
> > PCI: The same IRQ used for device 00:07.2
> > usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 11
> > usb-uhci.c: Detected 2 ports
> > usb.c: new USB bus registered, assigned bus number 2
> > hub.c: USB hub found
> > hub.c: 2 ports detected
> > 8139too Fast Ethernet driver 0.9.15 loaded
> > PCI: Found IRQ 10 for device 00:0f.0
> > PCI: The same IRQ used for device 00:0d.0
> > eth0: RealTek RTL8139 Fast Ethernet at 0xd289c000, 00:48:54:8c:45:36, IRQ 10
> > eth0: Identified 8139 chip type 'RTL-8139C'
> > eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
> > Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
> > SMSC Super-IO detection, now testing Ports 2F0, 370 ...
> > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
> > parport0: cpp_daisy: aa5500ff(98)
> > parport0: assign_addrs: aa5500ff(98)
> > parport0: Printer, Samsung ML-6040
> > parport_pc: Via 686A parallel port: io=0x378, irq=7
> > lp0: using parport0 (interrupt-driven).
> > lp0: console ready
>
