Roger wrote: > > Greg Sarsons wrote: > > > > I too have a an adaptec scsi which uses 152x driver and have been unable > > to get it to work. The the boot log (dmesg) my card is found and shows > > up as ava-1505a and in /proc/isapnp the card also shows up. > > > > However, I have not figured out a way to use it. > > > > If you make any headway please let me know. I have reported this as a > > bug on mdks bug tracking system. > > > > I noticed you have an LS-120 ... if it is not the a bootdisk does it > > work fine? I'm considering buying one. What else can you tell me about > > it. > > > try this in the /etc/modules.conf > > options aha152x aha152x1=0x340,11,7 > > and modprobe aha152x or add it to your /etc/modules file. > > oops. these are my config settings for mdk 7.2 with kernel 2.4.2 > self-installed. > should be similar. > > As I said, on my first cooker install a couple of weeks ago, usb mouse > and scsi adapter were all auto detected no problems. when i recently > upgraded that cooker install, i had to "specify" the options > "aha152x=0x340,11,7" but i used the hd.img boot disk on both > install/upgrades. > > I have yet to hear of any new drives from imation, based on the ls120. So other than that you are able to use your SCSI card right? No matter what modprode comes back with insmod failed. Tks any taking the time to respond. Greg
