Michel PRILLOT <[EMAIL PROTECTED]> writes:
> Sory, perhaps this configuration is not very usual, but...
>
> Proliant 1850R, 512M memory, smart array & Two PII 450MHz.
>
> 1) From iso beta2, boot ok, load second stage and...
> "in second stage install
> extracting usbcore.o
> extracting usb-uhci.o
> extracting isa-pnp.o
> extracting serial.o
> Please wait while probing serial ports..."
>
> cursor blink about ten second and stop blinking....
> This time keyboard is no more responding...
> Only one solution: Power OFF !!!
well and mouse works ?
> 2) Not discouraged, I make a network.img floppy ..., boot ok
> setting lan OK, loadind second stage and...
> "in second stage install
> extracting usbcore.o
> extracting usb-uhci.o
> extracting isa-pnp.o
> extracting serial.o
> Please wait while probing serial ports..."
>
> cursor blink about ten second and stop blinking....
> This time keyboard is no more responding...
> Only one solution: Power OFF !!!
>
> Houtch, keyboard is dead, can't do Alt F3 / F4... so
> Power off, and power on
>
> Reboot, re-lan parameters, re-second stage loading, but switch by Alt F3
> "Secondary stage install running (Drakx v1.460 built Tue Mar 20 12:20:34 2001)
> blabla..blabla
> running: /usr/bin/insmod -2>/dev/tty5 -f /tmp/serial.o"
>
> wait abou ten second, cursor stop, keybord lock, OK this was the last
> running process... Power off, power on, rerereboot.....
> before end of second stage loading, switch to Alt F4, wait for crash and next
> are the last lines..
> "Serial driver version 5.02 (2000-08-08(09?? have mispelled!!!)) with
> MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
> <6> ttyS00 at 0x03F8 (irq = 4) is a 16550A
> <6> ttyS01 at 0X02f8 (irq = 3) is a 16550A"
>
> That's all.
> What can I do now ?
>
> ---
> The box said "Need Windows 95 or better", so I installed Linux
>
--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
