Hi
VERSION (rsync ftp.uninett.no)
Mandrake Linux Cooker-i586 20010823 10:47
/ChangeLog/1.546/Wed Aug 22 18:03:39 2001//
A full graphic installation and contained all pbs.
I am very impressed by the new printer installation - very professional
indeed - thanks, beatiful.
In short - It still fails on the last step - 'foomatic-configuration failed'
and the bootdisk is not bootable.
report:
Network wizard takes very long time - from report.bug:
* starting step `configureNetwork'
* warning: Modification of a read-only value attempted at
/usr/lib/perl5/site_perl/5.6.1/MDK/Common/Globals.pm line 28.
The above line is repeated in three blocks as many, few and two times.
Printer:
* running: /etc/rc.d/init.d/cups start with root /mnt
Starting CUPS printing system: Warning: cannot open /proc/net/dev (No such
file
or directory). Limited output.
[ OK ]
OBS! In the following lines remember that I forgot to put a disk into my old
zipdrive, and the printer is daisychained to the parallell port.
* running: rmmod parport_pc
parport_pc: Device or resource busy
* running: rmmod lp
rmmod: module lp is not loaded
* running: rmmod parport_probe
rmmod: module parport_probe is not loaded
* running: rmmod parport
parport: Device or resource busy
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/lp.o
* missing module parport_probe
* running: rmmod parport_probe
rmmod: module parport_probe is not loaded
* running: ifup lo with root /mnt
Cannot open netlink socket: Address family not supported by protocol
modprobe: Can't open dependencies file
/lib/modules/2.4.8-10mdkBOOT/modules.dep
(No such file or directory)
* running: /etc/rc.d/init.d/cups start with root /mnt
Starting CUPS printing system: Warning: cannot open /proc/net/dev (No such
file
or directory). Limited output.
[ OK ]
OBS! looking for a module in 2.4.8-10 on a 2.4.8-11.
* running: foomatic-configure -s cups -n lp -c file:/dev/lp0 -p 61472 -d
pnm2ppa -N DeskJet 710C -L home -o PageSize=A4 -o PrintingMode=ColorNormal -o
Blackness=2 -o BottomMargin=150 -o DisableColorCorrection=0 -o LeftMargin=10
-o pnmFormat=PixMap -o PrinterModel=DJ710C -o RightMargin=10 -o TopMargin=10
-o Unidirectional=0 -o XOffset=160 -o YOffset=50 with root /mnt
lpadmin: Unable to connect to server: Network is unreachable
Could not set up/change the queue "lp"!
* warning: foomatic-configure failed at /usr/bin/perl-install/printer.pm line
677.
* starting step `summary'
Bootdisk from report.bug:
OBS! missing module floppy - the same goes for Ctrl-Alt-F2 +bug.
* starting step `createBootdisk'
* to put in modules scsi_hostadapter, scsi_hostadapter1
* missing module floppy
* missing module floppy
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/loop.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/fat.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/msdos.o
* running: /usr/bin/insmod_ 2> /dev/tty5 -f /tmp/vfat.o
* running: mkbootdisk --noprompt --appendargs hdc=ide-scsi devfs=mount
--bios 0 --device /dev/sda 2.4.8-11mdk with root /mnt
usage: mkbootdisk [--version] [--noprompt] [--mkinitrdargs <args>]
[--appendargs <args>] [--device <devicefile>] [--verbose -v]
[--compact]
<kernel>
(ex: mkbootdisk --device /dev/fd1 2.0.31)
* step `createBootdisk' finished
* starting step `setupBootloader'
* to put in modules scsi_hostadapter, scsi_hostadapter1
* running: mkinitrd -f /boot/initrd-2.4.8-11mdk.img --ifneeded 2.4.8-11mdk
with
root /mnt
mke2fs 1.22, 22-Jun-2001 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining whether
/tmp/initrd.img.L7DoZT is mounted.
* missing module floppy
* suggest_floppy: not adding sda
* missing module floppy
* warning: Died at /usr/bin/perl-install/any.pm line 221.
* running: keytab-lilo.pl > /boot/se-latin1.klt se-latin1 with root /mnt
Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Loading /usr/lib/kbd/keymaps/i386/qwerty/se-latin1.kmap.gz
* missing module floppy
* writing grub config to /mnt/boot/grub/menu.lst
Really nice evolution - thanks
guran
--
Mandrake 8.1 beta with kernel 2.4.8-11
