I recently purchased a SanDisk ImageMate for SmartMedia due to their providing drivers for the linux community.
I am using; kernel 2.4.12-3mdk LM 8.x +"extries" The sandisk drivers appear to be already compiled into the kernel their directions are "plug it in, it should work" I even read Brian's input re SanDisk in a recent cooker posting. However, after a week of reading, browsing, configuring, including the Sandisk "howto" ...no luck Pertinent data: make menuconfig shows sddr09 compiled into the kernel /usr/src/linux-2.4.12/drivers/usb/storage/sddr09.c /usr/src/linux-2.4.812/drivers/usb/storage/sddr09.h Oct 23 22:27:30 home2 usb: Loading USB interface (usb-ohci) succeeded Oct 23 22:27:30 home2 usb: Mount USB filesystem succeeded Oct 23 22:27:31 home2 usbd: usbd v0.1 (c) 1999 by Thomas Sailer Oct 23 22:27:31 home2 usbd: Starting USB daemon succeeded #lsmod usb-storage 52528 0 (unused) usb-ohci 18880 0 (unused) usbcore 50752 1 [usb-storage usb-ohci] tuner 4784 1 (autoclean) tvaudio 8576 0 (autoclean) (unused) bttv 57200 0 (unused) i2c-algo-bit 7328 1 [bttv] i2c-core 13600 0 [tuner tvaudio bttv i2c-algo-bit] videodev 5056 2 [bttv] reiserfs 158304 4 ncr53c8xx 52500 0 (unused) sd_mod 11572 0 (unused) scsi_mod 91804 2 [usb-storage ncr53c8xx sd_mod # lspcidrake agpgart : Silicon Integrated Systems [SiS]|530 Host unknown : Silicon Integrated Systems [SiS]|5513 [IDE] unknown : Silicon Integrated Systems [SiS]|85C503/5513 unknown : Silicon Integrated Systems [SiS]|ACPI usb-ohci : Silicon Integrated Systems [SiS]|7001 USB unknown : Silicon Integrated Systems [SiS]|5591/5592 AGP ncr53c8xx : Symbios|53c825 ne2k-pci : Winbond Electronics Corp|W89C940 bttv : Brooktree Corporation|Bt878 bttv : Brooktree Corporation|Bt878 snd-card-ymfpci : Yamaha Corporation|YMF-740C [DS-1L Audio Controller] Card:SiS 620 : Silicon Integrated Systems [SiS]|6306 3D-AGP unknown : Virtual|Hub [] unknown : SanDisk|ImageMate USB SmartMedia [] /proc/bus/usb/drivers usbdevfs hub usb-storage /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=d036a000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=55aa ProdID=a103 Rev= 1.01 S: Manufacturer=SanDisk S: Product=ImageMate USB SmartMedia S: SerialNumber=5EC52EB6C5 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms harddrake gives Vendor: Unknown Model: Unknown Kernel Module: Unknown Bus Type: USB Informations: This device hasn't been identified by HardDrake, please send `/proc/bus/*' files and this device ID `55aaa103' to:[EMAIL PROTECTED] Three or four emails have gotten Zip response tail -f /var/log/messages unplugging and replug in gives; Oct 24 09:04:06 home2 kernel: usb.c: USB disconnect on device 3 Oct 24 09:04:27 home2 kernel: hub.c: USB new device connect on bus1/2, assigned device number 4 Oct 24 09:04:27 home2 kernel: usb.c: USB device 4 (vend/prod0x55aa/0xa103) is not claimed by any active driver. I created various entries in /etc/fstab and atempted to mount them but get "mount: /dev/sdwhatever : unknown device I know this thing works for others ! What am I missing ??? William Bouterse Talkeetna, Ak
