St�phane Teletch�a <[EMAIL PROTECTED]> writes: > Not recognised ...
lspcidrake -f -v ? > I had to insert the parameters in modules.conf. Is it normal ? most tv cards are autodetected by bttv.o. that is, you shouldn't have to specify type=XX and tuner=YY. but some cards aren't. > (purpose of draxtv in this case ?) drakxtv isn't a tv card detection or configuration tool (detection is the job of detect_devices.pm and ldetect, configuration is done by drakx). ie, if we detect a tv card at install time, we alter /etc/modules so that bttv is automagically loaded when you boot. drakxtv's job is to offer you a nice GUI in order to let you scan for availlable tv channels instead of manually writing your .xawtv. > I don't have verbatim message, but i remember this : > BTTVA not recognized ... at boot. could you extract the related lines from /var/log/messages ? > Here is what i put in my modules.conf : > > > alias char-major_81 bttv > > pre-install bttv modprobe-k tuner ; modprobe -k msp3400 " modprobe-k tuner" isn't nedded. > > options i2c verbose=1 scan=1 debug=0 this line should be useless > > options bttv card=1 MIRO PCTV ? > > options tuner debug=0 type=3 Philips SECAM ? note that debug=0 isn't needed.
