Hi after clean install of Beta3 I use the Mandrake Control Center to try to configure the Agfa SnapScan 1212u. It says it detects it and asks me if I want it to be configured and I say yes. An icon is placed on my desktop for a link for Xsane to /dev/usb/scanner0 I then copied the Snapscan1212U_2bin file to /usr/local/etc and edited the /etc/sane.d/snapscan.conf file to point to that file. In the same file I also changed the device to be /dev/usb/scanner0 and I then used the agfafirm script to load the bin file onto the scanner.
But if I try to use the link created by the Control Center I get an error that there is no such device. I then used sane-find-scanner and it properly finds and identifies the scanner. By looking further I noticed that the /etc/sane.d/dll.conf file only had one line in it with the word ### net I added snapscan to that file and voila I was able to scan. Shouldn't the Control Center Scanner utility add that line when it says it configures that scanner and that it is ready to use? Thanks Serge Pluess
