On Tuesday 08 October 2002 02:16 am, Florin wrote:
> > I found what it was that was blocking my system. I had host allow in my
> > smb.conf and by default the new connection sharing put everything on a
> > different internal i[ address which for some reason I can not change with
> > the ics wizard or the net-setup wizard. so anyway I added to the smb.conf
> > the extra ip to cover the new internal network and all works.
>
> you can use the advanced options and choose your IP address !??
Well not using the mandrake tools. Somehow through my truning the firewall on
then off then on and redoing the ics wizard a couple times to try and figure
out what was going on the ics wizard set the internal ip to 192.168.1.1 and
on the main internet page it reads as 191.168.0.1 but the interface is indeed
stuck on 192.168.1.1. I know it's strange indeed and I have used the setup
wizard a few times also to change it back but for some reason it's decided to
stay were it is.
>
> > One thing to note is that shorewall will eat the packets for samba if you
> > run it on that machine. I have not tried to open that port as I don't
> > want samba accessible to the outside world only those on the inside.
>
> grep -v ^# /etc/shorewall/rules ?
[root@gate webmedic]# grep -v ^# /etc/shorewall/rules
ACCEPT net fw tcp 80,443,20,21 -
ACCEPT masq fw tcp 80,443,20,21 -
ACCEPT loc fw tcp 80,443,20,21 -
ACCEPT masq fw tcp
domain,bootps,http,https,631,imap,pop3,smtp,nntp
,ntp -
ACCEPT masq fw udp
domain,bootps,http,https,631,imap,pop3,smtp,nntp
,ntp -
ACCEPT fw masq tcp 631,137,138,139 -
ACCEPT fw masq udp 631,137,138,139 -
>
> cheers,
Thanks.
--
-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-
Brook Humphrey
Mobile PC Medic, 420 1st, Cheney, WA 99004, 509-235-9107
http://www.webmedic.net, [EMAIL PROTECTED], [EMAIL PROTECTED]
Holiness unto the Lord
-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-
