Hi!
First of all I hope I'm on the right list. After installing Mdk 9.0 all went
fine and my Teac IDE was installed over ide-scsi. After a try with gcombust
and gtoaster I was not able to burn. For debugging I started the following
burning session with just one simple file. There seems to be something burned
but as you can see in the following logs there is an error after just a few
seconds. If you need some more information or this is totally wrong here
please apologize this mail and maybe help with directing me to the right
place.
Thanks
Steffen
----------------------------------------------------------------------------------
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,1,0" fs=4096k -v
driveropts=burnfree speed=12 -dummy -eject -pad tsize=109760s -
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg
Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.6'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W512EB '
Revision : '2.0B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 3462144 = 3381 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 214 MB padsize: 30 KB
Total size: 246 MB (24:23.69) = 109777 sectors
Lout start: 246 MB (24:25/52) = 109777 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12369 (97:17/06)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 250072
Starting to write CD/DVD at speed 12 in dummy TAO mode for single session.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 D9 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.022s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 444416 bytes
Writing time: 9.301s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 23.782s
Average write speed 157.7x.
cdrecord: fifo had 71 puts and 8 gets.
