The error is probably that your CD media doesn't work w/ your drive. Now take this thread to expert.
On Sat, 2002-10-12 at 03:41, Steffen Barszus wrote: > Am Samstag, 12. Oktober 2002 01:11 schrieb Ben Reser: > > On Sat, Oct 12, 2002 at 12:13:26AM +0200, Steffen Barszus wrote: > > > Hi! > > > > > > First of all I hope I'm on the right list. After installing Mdk 9.0 all > > > went fine and my Teac IDE was installed over ide-scsi. After a try with > > > gcombust and gtoaster I was not able to burn. For debugging I started the > > > following burning session with just one simple file. There seems to be > > > something burned but as you can see in the following logs there is an > > > error after just a few seconds. If you need some more information or > > > this is totally wrong here please apologize this mail and maybe help with > > > directing me to the right place. > > > > > > Thanks > > > > > > Steffen > > > > > > ------------------------------------------------------------------------- > > > > > > Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,1,0" > > > fs=4096k -v driveropts=burnfree speed=12 -dummy -eject -pad > > > tsize=109760s - > > > > > > scsidev: '0,1,0' > > > scsibus: 0 target: 1 lun: 0 > > > Linux sg driver version: 3.1.24 > > > Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 J�rg > > > Schilling > > > TOC Type: 1 = CD-ROM > > > Using libscg version 'schily-0.6' > > > Driveropts: 'burnfree' > > > atapi: 1 > > > Device type : Removable CD-ROM > > > Version : 0 > > > Response Format: 1 > > > Vendor_info : 'TEAC ' > > > Identifikation : 'CD-W512EB ' > > > Revision : '2.0B' > > > Device seems to be: Generic mmc CD-RW. > > > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > > > Driver flags : SWABAUDIO BURNFREE > > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P > > > RAW/R96R Drive buf size : 3462144 = 3381 KB > > > FIFO size : 4194304 = 4096 KB > > > Track 01: data 214 MB padsize: 30 KB > > > Total size: 246 MB (24:23.69) = 109777 sectors > > > Lout start: 246 MB (24:25/52) = 109777 sectors > > > Current Secsize: 2048 > > > ATIP info from disk: > > > Indicated writing power: 5 > > > Is not unrestricted > > > Is not erasable > > > Disk sub type: Medium Type B, low Beta category (B-) (4) > > > ATIP start of lead in: -12369 (97:17/06) > > > ATIP start of lead out: 359849 (79:59/74) > > > Disk type: Short strategy type (Phthalocyanine or similar) > > > Manuf. index: 69 > > > Manufacturer: Moser Baer India Limited > > > Manufacturer is guessed because of the orange forum embargo. > > > The orange forum likes to get money for recent information. > > > The information for this media may not be correct. > > > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 250072 > > > Starting to write CD/DVD at speed 12 in dummy TAO mode for single > > > session. 0 seconds. Operation starts. > > > Waiting for reader process to fill input buffer ... > > > input buffer ready. > > > BURN-Free is OFF. > > > Turning BURN-Free on > > > Starting new track at sector: 0 > > > cdrecord: Input/output error. write_g1: scsi sendcmd: no error > > > CDB: 2A 00 00 00 00 D9 00 00 1F 00 > > > status: 0x2 (CHECK CONDITION) > > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 > > > Sense Key: 0x5 Illegal Request, Segment 0 > > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 > > > Sense flags: Blk 0 (not valid) > > > cmd finished after 0.022s timeout 40s > > > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 > > > > > > write track data: error after 444416 bytes > > > Writing time: 9.301s > > > Fixating... > > > WARNING: Some drives don't like fixation in dummy mode. > > > Fixating time: 23.782s > > > Average write speed 157.7x. > > > cdrecord: fifo had 71 puts and 8 gets. > > > > Wrong list. expert or newbies list is the proper place to get support > > for 9.0. > > Ok but for fixing in 9.0 it is the right list anyway or am I wrong ? ;o) > The message above was the same in 8.2, will mail the right list now ... > > Thanks > > Steffen
